Water Pump
Show/hide table
图 1 | g02589958 |
Show/hide table
313-2758 水泵总成 的技术规格     | |||
项目     | 数量     | 零件     | 技术规格说明     |
1     | 4     | 249-6365 锥形锁紧螺柱     | 拧紧至扭矩为 35 ± 5 N·m (26 ± 4 lb ft)。     |
Show/hide table
图 2 | g02590098 |
Show/hide table
项目     | 数量     | 零件     | 技术规格说明     |
2     | 1     | 235-4643 水泵密封     | 组装期间,将水泵密封在干燥状态下装入泵壳体。 从管中拆下水泵密封后 2 分钟内,安装水泵密封。 使用正确的安装工具。 不要使用手压方式安装水泵密封。     |
3     | 1     | 263-1052 泵轴     | 叶轮泵轴直径为 25.400 至 25.410 mm (1.0000 至 1.0004 in)。     |
压下泵轴的叶轮后,用清洁的发动机机油稍微润滑轴。 | |||
组装期间,泵轴必须与叶轮表面平齐,误差为 ± 0.15 mm (± 0.006 in)。 |
|||
4     | -     | -     | 将调整螺钉拧紧扭矩至扭结为 4.00 ± 1.25 N·m (35.40 ± 11.06 lb in)。     |
5     | 1     | 229-5472 轴承锁紧螺母     | 拧紧扭矩至扭矩为 300 ± 30 N·m (221 ± 22 lb ft)。     |
6     | -     | 259-4596 O 形密封圈     | 用 P-80 或 5P-3975 橡胶润滑剂 润滑。     |
B     | -     | -     | 叶轮孔径为 25.350 ± 0.012 mm (0.9980 ± 0.0005 in)。     |
C     | -     | -     | 叶轮与泵壳体之间的距离为 14.24 mm (0.561 in)。     |
Caterpillar Information System:
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0190 - FMI 03
G3500 A3 Engines Exhaust Temperature Module
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Hydraulic Control - Assemble
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Hydraulic Control - Disassemble
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Hydraulic Control - Install
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Hydraulic Control - Remove
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0190 - FMI 02
2007/12/01 Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As {1156}
2007/12/24 Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As {1156}
2011/02/11 Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As {1156}
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0111 - FMI 03
2008/01/01 A New O-ring for the Injector Sleeve is Now Used {1100}
C13 and C15 On-highway Engines Engine Monitoring System
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0268 - FMI 02
C9 Petroleum Engines Atmospheric Pressure Sensor - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Electronic Service Tool Does Not Communicate
C9 Petroleum Engines Coolant Temperature Sensor - Remove and Install
C9 Petroleum Engines Engine Oil Pressure Sensor - Remove and Install
3176C, 3406E and 3456 Industrial Engines Electrical Connectors
2007/12/17 The Caterpillar Digital Voltage Regulator (CDVR) Has been Improved {4467}
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0269 - FMI 04
C9 Petroleum Engines Fuel Pressure Sensor - Remove and Install
C13 and C15 On-highway Engines Solenoid Valve - Test
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0333 - FMI 03