Transmission Hydraulic Control - Remove
拆卸步骤
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
注: 塞住并盖好所有开口和管组件。
- 拆下螺栓 (1) 并拆下盖 (2) 。 如有必要,拆下垫片。
Show/hide table
图 1 | g01436919 |
- 拆下软管组件 (3) 和法兰。 拆下软管组件 (4) 。
Show/hide table
图 2 | g01436929 |
- 拆下套筒 (5) 并拆下 O 形密封圈 (6) 。
Show/hide table
图 3 | g01436980 |
Show/hide table
图 4 | g01436981 |
- 断开线束组件 (8) 。 断开软管组件 (7) 。
Show/hide table
图 5 | g01436935 |
注: 为便于组装,标记线束组件和软管组件。
- 拆下螺栓 (9) 和夹子。 拆下调节阀 (10) 。
- 对于剩余的调节阀,重复步骤 5。
- 拆下螺栓 (12) 。 拆下变速箱液压控制装置 (11) 。
Show/hide table
图 6 | g01436996 |
Caterpillar Information System:
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0190 - FMI 02
2007/12/01 Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As {1156}
2007/12/24 Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As {1156}
2011/02/11 Procedure to Use the Correct Mounting Bolts with the 10R-2356 Flywheel As {1156}
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0111 - FMI 03
2008/01/01 A New O-ring for the Injector Sleeve is Now Used {1100}
2008/01/07 A New O-ring for the Injector Sleeve is Now Used {1100}
C175 Generator Sets Fuel Related Components in Cold Weather
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) Indicators of Alarm Module or Remote Annunciator Are Constantly Flashing
G3600 Engines Starting - Test
G3600 Engines Air Starting Motor Problem
G3500B Engines Prelubrication Pump Problem
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Hydraulic Control - Install
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Hydraulic Control - Disassemble
TH55-E70 and TH55-E90 Petroleum Transmissions Transmission Hydraulic Control - Assemble
G3500 A3 Engines Exhaust Temperature Module
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0190 - FMI 03
C175-16 Locomotive Engine Water Pump
C13 and C15 On-highway Engines Engine Monitoring System
Electronic Modular Control Panel II+ Paralleling (EMCP II+P) GSC CID 0268 - FMI 02
C9 Petroleum Engines Atmospheric Pressure Sensor - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Electronic Service Tool Does Not Communicate
C9 Petroleum Engines Coolant Temperature Sensor - Remove and Install
C9 Petroleum Engines Engine Oil Pressure Sensor - Remove and Install