C32 Marine Engines Caterpillar


Expansion Tank (SCAC) - Remove and Install

Usage:

C32 AX2

拆卸步骤

表 1
所需工具 
工具  零件号  零件描述  数量 
207-1601  橡胶润滑剂 

------ WARNING! ------

热的冷却液、蒸汽和碱会造成人身伤害。

在工作温度下,发动机冷却液是热的而且处在压力下。 散热器和所有到加热器的管路或发动机中都有热的冷却液或蒸汽。 与它们的任何接触都会造成严重烫伤。

只有当发动机停机且冷却系统压力盖已经冷却到可以徒手触摸时,再慢慢拆下冷却系统压力盖以释放压力。

不要试图在冷却液还热的时候去拧紧软管接头,软管会脱落而造成灼伤。

警告:冷却系统的冷却液添加剂含碱。 应避免它与皮肤和眼睛接触。




    图 1g06237713

  1. 断开两个软管 (1) 和两个螺栓 (2)。


    图 2g06237736

  2. 拆下两个螺栓 (3)。


    图 3g06237743

  3. 松开软管卡箍 (5) 和螺栓/夹子组件 (4),并将软管 (6) 移到一旁。

  4. 拆下两个螺栓 (7) 和两个螺栓 (8)。

  5. 断开冷却液液位传感器 (9) 并拆下膨胀水箱(SCAC) (10)。

安装步骤

  1. 按与拆卸相反的顺序安装膨胀水箱 (8)。

    1. 使用工具 (A) 润滑 O 形圈。

Caterpillar Information System:

525D, 535D, 545D and 555D Wheel Skidders Machine Systems Brake Control Valve (Service) - Remove and Install
An Improved Mounting for the Tube in the Cooling Lines Group Is Now Used on Certain D Series Wheel Skidders {1071, 1087, 1380} An Improved Mounting for the Tube in the Cooling Lines Group Is Now Used on Certain D Series Wheel Skidders {1071, 1087, 1380}
963K Track-Type Loader Machine Systems General Information (Fan Hydraulic System)
973K Track-Type Loader Machine Systems Cab - Tilt - Full Tilt
D6 XE Track-Type Tractor Systems General Information (Power Train System)
320GC, 320 and 323 Excavators Machine Systems Stick Cylinder - Remove and Install
320GC, 320 and 323 Excavators Machine Systems Boom Cylinder - Remove and Install
320 GC, 320 and 323 Excavators Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - High Pressure Line) (Attachment Valves #1, #2, #4
336, 336 GC and 340 Excavator Systems Machine System
A Procedure to Realign Transmission Slide Rails Is Available for Certain D6T and D8T Track-Type Tractors {3256, 3258} A Procedure to Realign Transmission Slide Rails Is Available for Certain D6T and D8T Track-Type Tractors {3256, 3258}
C7.1 Industrial Engine Reference Information
973K Track-Type Loader Engine Supplement Rear Guard - Remove and Install
963K Track-Type Loader Machine Systems Location of Components (Fan Hydraulic System)
963K Track-Type Loader Machine Systems Electronic Control (Fan Hydraulic System)
973K Track-Type Loader Power Train Gear Pump (Charge) - Remove and Install
525D, 535D, 545D and 555D Wheel Skidders Machine Systems Pilot Oil Accumulator (Dead Engine Lower) - Remove and Install
525D, 535D, 545D and 555D Wheel Skidders Machine Systems Arch Cylinder - Remove and Install
336, 336 GC and 340 Excavator Systems Main Hydraulic Pump
D9T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} D9T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
D9T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} D9T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
MD6250 Rotary Drill Capacities (Refill)
336, 336 GC and 340 Excavator Systems Pump Control (Main Hydraulic) - Main Pump Regulator
992K Wheel Loader System Schematic
New Water Pump Seal and Pumps Used on Certain 3500, G3500, and C175 Engines {1361, 7555} New Water Pump Seal and Pumps Used on Certain 3500, G3500, and C175 Engines {1361, 7555}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.