Rear Guard - Remove and Install
- Remove three bolts (1).
Show/hide table
Illustration 2 g06237501 - Disconnect door stop (2).
Remove only the four outer bolts (3).
Show/hide tableIllustration 3 g06237514 - Use a suitable lifting device to remove the Rear guard. The weight of the Rear guard is approximately
1780 kg (3924 lb) .Show/hide tableIllustration 4 g06237548 - Remove 4 bolts (4).
Show/hide table
Illustration 5 g06237560 - Remove four bolts (5).
Repeat for opposite side.
Show/hide tableIllustration 6 g06237565 - Remove both bolts from the bracket (7). Remove two remaining bolts (6).
Remove Rear guard.
Show/hide table
Illustration 1 | g06237440 |
- Install Rear guard in reverse order of removal.
Caterpillar Information System:
320, 323 Excavator Engine Supplement Engine Oil Cooler - Remove and Install
Fuel Tanks May Crack And Leak On Certain D6T Track-Type Tractors {1273} Fuel Tanks May Crack And Leak On Certain D6T Track-Type Tractors {1273}
An Improved Transmission Lockout Switch is Now Used on Certain Landfill Compactors, Wheel Dozers, and Wheel loaders {7332} An Improved Transmission Lockout Switch is Now Used on Certain Landfill Compactors, Wheel Dozers, and Wheel loaders {7332}
Improved Tilt Lever Assembly Is Now Available for Certain 994K Large Wheel Loaders {6116, 6117, 6119} Improved Tilt Lever Assembly Is Now Available for Certain 994K Large Wheel Loaders {6116, 6117, 6119}
Procedure to Install a Wall Flow Diesel Particulate Filter Now Available for AD55B and AD60 Articulated Trucks {108F} Procedure to Install a Wall Flow Diesel Particulate Filter Now Available for AD55B and AD60 Articulated Trucks {108F}
963K Track-Type Loader Machine Systems Bucket Control
D6 Track-Type Tractor Cooling System Coolant Sample (Level 2) - Obtain
D6 Track-Type Tractor Cooling System Coolant Sample (Level 1) - Obtain
973K Track-Type Loader Machine Systems Cab - Tilt - Partial Tilt
An Improved Rotary Switch Assembly Is Now Used on Certain D3K2, D4K2, and D5K2 Track-Type Tractors {1408, 7301} An Improved Rotary Switch Assembly Is Now Used on Certain D3K2, D4K2, and D5K2 Track-Type Tractors {1408, 7301}
An Improved Primer Is Now Used for Bonding the Cab Glass on Certain Wheel Loaders {0374, 0649, 7301, 7305, 7310} An Improved Primer Is Now Used for Bonding the Cab Glass on Certain Wheel Loaders {0374, 0649, 7301, 7305, 7310}
D6 Track-Type Tractor Windows - Clean
C7.1 Industrial Engine Reference Information
A Procedure to Realign Transmission Slide Rails Is Available for Certain D6T and D8T Track-Type Tractors {3256, 3258} A Procedure to Realign Transmission Slide Rails Is Available for Certain D6T and D8T Track-Type Tractors {3256, 3258}
336, 336 GC and 340 Excavator Systems Machine System
320 GC, 320 and 323 Excavators Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - High Pressure Line) (Attachment Valves #1, #2, #4
320GC, 320 and 323 Excavators Machine Systems Boom Cylinder - Remove and Install
320GC, 320 and 323 Excavators Machine Systems Stick Cylinder - Remove and Install
D6 XE Track-Type Tractor Systems General Information (Power Train System)
973K Track-Type Loader Machine Systems Cab - Tilt - Full Tilt
963K Track-Type Loader Machine Systems General Information (Fan Hydraulic System)
An Improved Mounting for the Tube in the Cooling Lines Group Is Now Used on Certain D Series Wheel Skidders {1071, 1087, 1380} An Improved Mounting for the Tube in the Cooling Lines Group Is Now Used on Certain D Series Wheel Skidders {1071, 1087, 1380}
525D, 535D, 545D and 555D Wheel Skidders Machine Systems Brake Control Valve (Service) - Remove and Install
C32 Marine Engines Expansion Tank (SCAC) - Remove and Install