An Improved Mounting for the Tube in the Cooling Lines Group Is Now Used on Certain D Series Wheel Skidders {1071, 1087, 1380}
- Wheel Skidder
- 525D (S/N: GKP1-503)
- 535D (S/N: MTP1-431)
- 545D (S/N: KGP1-275)
- 555D (S/N: PGY1-155)
- 535D (S/N: MTP1-431)
Description Of Change: An improved mounting for the tube in the cooling lines group is now used on the machines listed above. The improved mounting is mounted on the turbocharger exhaust duct. The improved mounting eliminates the vibration of the cooling lines group and improves the service life of the hoses.
Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
Show/hide table
Required Part List | |||
---|---|---|---|
Item | Qty | New Part Number | Part Name |
1 | 1 | Plate As | |
2 | 2 | Hard Washer | |
3 | 1 | Bolt | |
4 | 1 | Clip | |
5 | 1 | Clip | |
6 | 1 | Hard Washer | |
7 | 1 | Bolt |
Removal Procedure
Show/hide table
Illustration 1 | g06238321 |
(A) (B) (C) (D) (E) (F) (G) (H) (J) (K) (L) |
- Remove the bolt (A), washer (B), and the rubber mount (C) from the plate assembly (K). Discard the parts.
- Remove the locknut (D), hard washer (E), and the U-bolt (F) from the tube (L) and remove the plate (G). Discard the parts.
- Remove the cable strap (H) and the cover (J). Discard the parts.
Installation Procedure
Show/hide table
Illustration 2 | g06238349 |
(1) (2) (3) (4) (5) (6) (7) (L) (M) |
- Install the plate assembly (1) to the duct (M) using the hard washer (2), and the bolt (3).
- Position the clip (4) and clip (5) on the tube (L) and install the clips to the plate assembly (1) using the hard washer (6) and bolt (7).
Caterpillar Information System:
963K Track-Type Loader Machine Systems General Information (Fan Hydraulic System)
973K Track-Type Loader Machine Systems Cab - Tilt - Full Tilt
D6 XE Track-Type Tractor Systems General Information (Power Train System)
320GC, 320 and 323 Excavators Machine Systems Stick Cylinder - Remove and Install
320GC, 320 and 323 Excavators Machine Systems Boom Cylinder - Remove and Install
320 GC, 320 and 323 Excavators Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - High Pressure Line) (Attachment Valves #1, #2, #4
336, 336 GC and 340 Excavator Systems Machine System
A Procedure to Realign Transmission Slide Rails Is Available for Certain D6T and D8T Track-Type Tractors {3256, 3258} A Procedure to Realign Transmission Slide Rails Is Available for Certain D6T and D8T Track-Type Tractors {3256, 3258}
C7.1 Industrial Engine Reference Information
973K Track-Type Loader Engine Supplement Rear Guard - Remove and Install
320, 323 Excavator Engine Supplement Engine Oil Cooler - Remove and Install
Fuel Tanks May Crack And Leak On Certain D6T Track-Type Tractors {1273} Fuel Tanks May Crack And Leak On Certain D6T Track-Type Tractors {1273}
525D, 535D, 545D and 555D Wheel Skidders Machine Systems Brake Control Valve (Service) - Remove and Install
C32 Marine Engines Expansion Tank (SCAC) - Remove and Install
963K Track-Type Loader Machine Systems Location of Components (Fan Hydraulic System)
963K Track-Type Loader Machine Systems Electronic Control (Fan Hydraulic System)
973K Track-Type Loader Power Train Gear Pump (Charge) - Remove and Install
525D, 535D, 545D and 555D Wheel Skidders Machine Systems Pilot Oil Accumulator (Dead Engine Lower) - Remove and Install
525D, 535D, 545D and 555D Wheel Skidders Machine Systems Arch Cylinder - Remove and Install
336, 336 GC and 340 Excavator Systems Main Hydraulic Pump
D9T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} D9T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
D9T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} D9T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
MD6250 Rotary Drill Capacities (Refill)
336, 336 GC and 340 Excavator Systems Pump Control (Main Hydraulic) - Main Pump Regulator