525D, 535D, 545D and 555D Wheel Skidders Machine Systems Caterpillar


Pilot Oil Accumulator (Dead Engine Lower) - Remove and Install

Usage:

525D 2L5

Removal Procedure

Start By:

  1. Remove the control manifold (pilot).


    Illustration 1g06242629

  1. Remove pilot oil accumulator (1) from control manifold (2).

Installation Procedure

  1. Install pilot oil accumulator (1) in the reverse order of removal.

    1. Tighten pilot accumulator (1) to a torque of 130 ± 20 N·m (96 ± 15 lb ft).

Caterpillar Information System:

973K Track-Type Loader Power Train Gear Pump (Charge) - Remove and Install
963K Track-Type Loader Machine Systems Electronic Control (Fan Hydraulic System)
963K Track-Type Loader Machine Systems Location of Components (Fan Hydraulic System)
C32 Marine Engines Expansion Tank (SCAC) - Remove and Install
525D, 535D, 545D and 555D Wheel Skidders Machine Systems Brake Control Valve (Service) - Remove and Install
An Improved Mounting for the Tube in the Cooling Lines Group Is Now Used on Certain D Series Wheel Skidders {1071, 1087, 1380} An Improved Mounting for the Tube in the Cooling Lines Group Is Now Used on Certain D Series Wheel Skidders {1071, 1087, 1380}
963K Track-Type Loader Machine Systems General Information (Fan Hydraulic System)
973K Track-Type Loader Machine Systems Cab - Tilt - Full Tilt
D6 XE Track-Type Tractor Systems General Information (Power Train System)
320GC, 320 and 323 Excavators Machine Systems Stick Cylinder - Remove and Install
320GC, 320 and 323 Excavators Machine Systems Boom Cylinder - Remove and Install
320 GC, 320 and 323 Excavators Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - High Pressure Line) (Attachment Valves #1, #2, #4
525D, 535D, 545D and 555D Wheel Skidders Machine Systems Arch Cylinder - Remove and Install
336, 336 GC and 340 Excavator Systems Main Hydraulic Pump
D9T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} D9T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
D9T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} D9T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
MD6250 Rotary Drill Capacities (Refill)
336, 336 GC and 340 Excavator Systems Pump Control (Main Hydraulic) - Main Pump Regulator
992K Wheel Loader System Schematic
New Water Pump Seal and Pumps Used on Certain 3500, G3500, and C175 Engines {1361, 7555} New Water Pump Seal and Pumps Used on Certain 3500, G3500, and C175 Engines {1361, 7555}
986K Wheel Loader Bucket Stops - Inspect/Replace
986K Wheel Loader Bucket Wear Plates - Inspect/Replace
D6 Track-Type Tractor Systems General Information (Hydraulic System)
320GC, 320 and 323 Excavators Machine Systems Bucket Cylinder - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.