963K Track-Type Loader Machine Systems Caterpillar

Location of Components (Fan Hydraulic System)

Usage:

963K YDR

For more information concerning the location of Fan Hydraulic System components, refer to the Schematic for your machine.

Hydraulic Oil Tank

Show/hide table




Illustration 1	g03818528

The hydraulic oil tank is located in the front of the machine.

Reference: Refer to Systems Operation, M0086198, "Hydraulic Tank and Filter" for more information on the hydraulic tank.

Fan Drive Pump (Gear Pump)

Show/hide table




Illustration 2	g03830393

The fan drive pump is located in line with the implement pump.

Reference: Refer to Systems Operation, M0086198, "Gear Pump (Fan Drive)" for more information on the fan drive pump.

Engine ECM

Show/hide table




Illustration 3	g06237730

The engine ECM is located in the right-hand side of the engine.

Reference: Refer to Systems Operation, M0086198, "Electronic Control (Fan Hydraulic System)" for more information on the engine ECM.

Fan Control ECM

Show/hide table




Illustration 4	g06238084

The fan control ECM is located on the right side of the machine, above the engine ECM, by the primary air filter.

Reference: Refer to Systems Operation, M0086198, "Gear Motor (Fan Drive)" for more information on the fan drive motor.

Fan Drive Motor (Gear Motor)

Show/hide table




Illustration 5	g06237732

The fan drive motor is located at the back of the machine.

Reference: Refer to Systems Operation, M0086198, "Gear Motor (Fan Drive)" for more information on the fan drive motor.

Caterpillar Information System:

C32 Marine Engines Expansion Tank (SCAC) - Remove and Install

525D, 535D, 545D and 555D Wheel Skidders Machine Systems Brake Control Valve (Service) - Remove and Install

An Improved Mounting for the Tube in the Cooling Lines Group Is Now Used on Certain D Series Wheel Skidders {1071, 1087, 1380} An Improved Mounting for the Tube in the Cooling Lines Group Is Now Used on Certain D Series Wheel Skidders {1071, 1087, 1380}

963K Track-Type Loader Machine Systems General Information (Fan Hydraulic System)

973K Track-Type Loader Machine Systems Cab - Tilt - Full Tilt

D6 XE Track-Type Tractor Systems General Information (Power Train System)

320GC, 320 and 323 Excavators Machine Systems Stick Cylinder - Remove and Install

320GC, 320 and 323 Excavators Machine Systems Boom Cylinder - Remove and Install

320 GC, 320 and 323 Excavators Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - High Pressure Line) (Attachment Valves #1, #2, #4

336, 336 GC and 340 Excavator Systems Machine System

A Procedure to Realign Transmission Slide Rails Is Available for Certain D6T and D8T Track-Type Tractors {3256, 3258} A Procedure to Realign Transmission Slide Rails Is Available for Certain D6T and D8T Track-Type Tractors {3256, 3258}

C7.1 Industrial Engine Reference Information

963K Track-Type Loader Machine Systems Electronic Control (Fan Hydraulic System)

973K Track-Type Loader Power Train Gear Pump (Charge) - Remove and Install

525D, 535D, 545D and 555D Wheel Skidders Machine Systems Pilot Oil Accumulator (Dead Engine Lower) - Remove and Install

525D, 535D, 545D and 555D Wheel Skidders Machine Systems Arch Cylinder - Remove and Install

336, 336 GC and 340 Excavator Systems Main Hydraulic Pump

D9T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} D9T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}

MD6250 Rotary Drill Capacities (Refill)

336, 336 GC and 340 Excavator Systems Pump Control (Main Hydraulic) - Main Pump Regulator

992K Wheel Loader System Schematic

New Water Pump Seal and Pumps Used on Certain 3500, G3500, and C175 Engines {1361, 7555} New Water Pump Seal and Pumps Used on Certain 3500, G3500, and C175 Engines {1361, 7555}

986K Wheel Loader Bucket Stops - Inspect/Replace