Gear Pump (Charge) - Remove and Install
Start By:
- Fully tilt the cab.
- Drain the hydraulic fluid. Refer to Operation and Maintenance Manual, "Hydraulic Systems Oil - Change" for the correct draining and filling procedures.
- Remove bolts and disconnect hose assemblies (1) and (4).
- Remove the bolts (2) and Gear Pump (Charge) (3).
Show/hide table
| |
| Illustration 1 | g06237765 |
- Install Gear Pump (Charge) (3) in the reverse order of removal.
Caterpillar Information System:
963K Track-Type Loader Machine Systems Electronic Control (Fan Hydraulic System)
963K Track-Type Loader Machine Systems Location of Components (Fan Hydraulic System)
C32 Marine Engines Expansion Tank (SCAC) - Remove and Install
525D, 535D, 545D and 555D Wheel Skidders Machine Systems Brake Control Valve (Service) - Remove and Install
An Improved Mounting for the Tube in the Cooling Lines Group Is Now Used on Certain D Series Wheel Skidders {1071, 1087, 1380} An Improved Mounting for the Tube in the Cooling Lines Group Is Now Used on Certain D Series Wheel Skidders {1071, 1087, 1380}
963K Track-Type Loader Machine Systems General Information (Fan Hydraulic System)
973K Track-Type Loader Machine Systems Cab - Tilt - Full Tilt
D6 XE Track-Type Tractor Systems General Information (Power Train System)
320GC, 320 and 323 Excavators Machine Systems Stick Cylinder - Remove and Install
320GC, 320 and 323 Excavators Machine Systems Boom Cylinder - Remove and Install
320 GC, 320 and 323 Excavators Tool Control System Solenoid Valve (Proportional Reducing) - Calibrate - High Pressure Line) (Attachment Valves #1, #2, #4
336, 336 GC and 340 Excavator Systems Machine System
525D, 535D, 545D and 555D Wheel Skidders Machine Systems Pilot Oil Accumulator (Dead Engine Lower) - Remove and Install
525D, 535D, 545D and 555D Wheel Skidders Machine Systems Arch Cylinder - Remove and Install
336, 336 GC and 340 Excavator Systems Main Hydraulic Pump
D9T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} D9T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
D9T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} D9T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
MD6250 Rotary Drill Capacities (Refill)
336, 336 GC and 340 Excavator Systems Pump Control (Main Hydraulic) - Main Pump Regulator
992K Wheel Loader System Schematic
New Water Pump Seal and Pumps Used on Certain 3500, G3500, and C175 Engines {1361, 7555} New Water Pump Seal and Pumps Used on Certain 3500, G3500, and C175 Engines {1361, 7555}
986K Wheel Loader Bucket Stops - Inspect/Replace
986K Wheel Loader Bucket Wear Plates - Inspect/Replace
D6 Track-Type Tractor Systems General Information (Hydraulic System)