New Water Pump Seal and Pumps Used on Certain 3500, G3500, and C175 Engines {1361, 7555} Caterpillar


New Water Pump Seal and Pumps Used on Certain 3500, G3500, and C175 Engines {1361, 7555}

Usage:

789C 2BW
Hydraulic Shovel
6060 (S/N: DHN1-UP)
6060 FS (S/N: DH31-UP)
Off-Highway Truck/Tractor
777D (S/N: DCB1-UP; AGC1-UP; FKR1-UP; 3PR1-UP)
785B (S/N: 6HK1-UP)
785C (S/N: APX1-UP; 5AZ1-UP)
789C (S/N: 2BW1-UP)
793C (S/N: ATY1-UP; 4GZ1-UP)
793F (S/N: SND1-UP; SSP1-UP)
795F AC (S/N: ERM1-UP)
797F (S/N: LAJ1-UP; WSP1-UP)
Track-Type Tractor
D11R (S/N: AAF1-UP; 9TR1-UP; 9XR1-UP; 7PZ1-UP)
Transmission
TH55 - KRESS (S/N: KCH1-UP)
Wheel Dozer
854G (S/N: A4W1-UP)
Wheel Loader
966G (S/N: 3SW1-UP)
992G (S/N: 7HR1-UP; AZX1-UP; ADZ1-UP)
994F (S/N: 4421-UP)
Service Magazine, SEPD1725, 20, January 2014, "New Water Pump Seal and Pumps Used on Certain 3500, G3500, and C175 Engines". Disregard the previous article. The article has been revised to update the serial numbers.

Description Of Change: The water pump seal is made of more robust material capable of handling higher engine torsions and dry conditions.

Adaptable To:



Illustration 1g03394776
(1) 416-0603 Seal Gp

The new 416-0603 Seal Gp replaces the previous 166-4376 Seal Gp. The new seal is also used in the new water pumps. Table 1 contains the new and previous part numbers for this change. The new seal requires the use of the new 438-8155 Adaptor for installation. Table 2 contains the effective serial numbers.

Table 1
New Part Number  Previous Part Number 
416-0603 Seal Gp  166-4376 Seal Gp 
416-0606 Water Pump Gp  212-8172 Water Pump Gp 
416-0607 Water Pump Gp  212-8173 Water Pump Gp 
416-0608 Water Pump Gp  212-8175 Water Pump Gp 
416-0609 Water Pump Gp  212-8176 Water Pump Gp 
416-0610 Water Pump Gp  212-8177 Water Pump Gp 
416-0611 Water Pump Gp  250-6721 Water Pump Gp 
416-0612 Water Pump Gp  312-0964 Water Pump Gp 
416-0613 Water Pump Gp  313-2650 Water Pump Gp 
416-0614 Water Pump Gp  350-8955 Water Pump Gp 

Table 2
Effective Serial Numbers 
S/N:3PR78005-UP 
S/N:AGC77013-UP 
S/N:DCB32224-UP 
S/N:FKR02236-UP 
S/N:6HK99382-UP 
S/N:APX75002-UP 
S/N:5AZ00428-UP 
S/N:2BW83002-UP 
S/N:4AR77003-UP 
S/N:4GZ75003-UP 
S/N:SSP00987-UP 
S/N:SND00132-UP 
S/N:ERM00285-UP 
S/N:LAJ00485-UP 
S/N:WSP00145-UP 
S/N:A4W00289-UP 
S/N:3SW75005-UP 
S/N:7HR78005-UP 
S/N:ADZ76005-UP 
S/N:AZX75008-UP 
S/N:44275002-UP 
S/N:7PZ75055-UP 
S/N:9TR76013-UP 
S/N:9XR75003-UP 
S/N:AAF75011-UP 
S/N:ATY01125-UP 
S/N:DHN60174-UP 
S/N:DH360175-UP 
S/N:KCH22059-UP 

Caterpillar Information System:

992K Wheel Loader System Schematic
336, 336 GC and 340 Excavator Systems Pump Control (Main Hydraulic) - Main Pump Regulator
MD6250 Rotary Drill Capacities (Refill)
D9T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} D9T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
D9T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565} D9T Track-Type Tractor TA2 Technical Inspection {0372, 1000, 7000, 753T, 7565}
336, 336 GC and 340 Excavator Systems Main Hydraulic Pump
525D, 535D, 545D and 555D Wheel Skidders Machine Systems Arch Cylinder - Remove and Install
525D, 535D, 545D and 555D Wheel Skidders Machine Systems Pilot Oil Accumulator (Dead Engine Lower) - Remove and Install
973K Track-Type Loader Power Train Gear Pump (Charge) - Remove and Install
963K Track-Type Loader Machine Systems Electronic Control (Fan Hydraulic System)
963K Track-Type Loader Machine Systems Location of Components (Fan Hydraulic System)
C32 Marine Engines Expansion Tank (SCAC) - Remove and Install
986K Wheel Loader Bucket Stops - Inspect/Replace
986K Wheel Loader Bucket Wear Plates - Inspect/Replace
D6 Track-Type Tractor Systems General Information (Hydraulic System)
320GC, 320 and 323 Excavators Machine Systems Bucket Cylinder - Remove and Install
330 GC and 330 Excavator Joystick Controls
A New Milling Process Has Improved the Cylinder Block Deck Surface Finish on Certain C15 and C18 Machine Engines {0677, 1201} A New Milling Process Has Improved the Cylinder Block Deck Surface Finish on Certain C15 and C18 Machine Engines {0677, 1201}
330 GC and 330 Excavator Declaration of Conformity
Track Joint Inspection and Lubrication Procedure Using 8T-3115 Lubricator Gp - Portable Track {0646, 4169, 4170} Track Joint Inspection and Lubrication Procedure Using 8T-3115 Lubricator Gp - Portable Track {0646, 4169, 4170}
Procedure to Reinforce the Front Frame Axle Pads Is Now Available for Certain 982M Medium Wheel Loaders {0679, 3268, 3278, 3282} Procedure to Reinforce the Front Frame Axle Pads Is Now Available for Certain 982M Medium Wheel Loaders {0679, 3268, 3278, 3282}
C32 Marine Engines Auxiliary Water Pump - Install
320GC, 320 and 323 Excavators Machine Systems Load Control Valve (Stick Cylinder) - Remove and Install
Requirements for Installation of Cat Production Measurement (CPM) Payload Control Kit on 926M, 930Mand 938M Wheel Loaders {7494} Requirements for Installation of Cat Production Measurement (CPM) Payload Control Kit on 926M, 930Mand 938M Wheel Loaders {7494}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.