2015/01/27 Caterpillar


New Engine Software Is Used For Certain D11 Track-Type Tractors {1920, 7620}

Usage:

D11T GEB
Track-Type Tractor:
D11T (S/N: GEB1-UP; TPB1-UP)
Service Magazine SEPD1883, 10 November 2014, "New Engine Software Is Used For Certain D11 Track-Type Tractors". The original article has been revised to update the effective serial number for prefix S/N:GEB
.

Description of Change: The new engine software has recalibrated fuel to air ratio control maps for improved power at high altitudes.

Adaptable To: The new 470-1172 Engine Ratings Electronic Software Gp replaces the existing 434-9508 Engine Ratings Electronic Software Gp.

This change is effective for the serial numbers listed in Table 1.

Table 1
Effective Serial Numbers    
S/N:GEB01022-UP    
S/N:TPB00212-UP    

Caterpillar Information System:

2015/03/12 An Improved Window Guide and Rail Are Now Being Used on Certain Wheel Loaders {7310}
335F CR Excavator C7.1 Engine Supplement Hood - Remove and Install - Engine
2014/10/20 An Improved Single Tilt Brace Is Now Used On Certain D9R and D9T Track-Type Tractors {6050, 6061}
335F CR Excavator C7.1 Engine Supplement Flexible Exhaust Pipe - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Coolant Flow - Test
C27 and C32 Engines for Caterpillar Built Machines Aftertreatment Identification Module - Test
335F CR Excavator C7.1 Engine Supplement Soot Sensor - Remove and Install
Fuel Lines Rework on Certain D11T Tier 2 Track-Type Tractors{1274} Fuel Lines Rework on Certain D11T Tier 2 Track-Type Tractors{1274}
D7E Track-Type Tractor Engine Supplement Hood - Remove and Install
D7E Track-Type Tractor Engine Supplement Pump Drive - Remove and Install
335F CR Excavator C7.1 Engine Supplement Engine Oil Cooler - Remove and Install
335F CR Excavator C7.1 Engine Supplement Fuel Cooler - Remove and Install
A New Autolube Pump and Internal Circuit Board Are Now Available for Certain Wheel Loaders and Articulated Trucks {1408, 7516, 7540, 7610, 7620} A New Autolube Pump and Internal Circuit Board Are Now Available for Certain Wheel Loaders and Articulated Trucks {1408, 7516, 7540, 7610, 7620}
D3K2, D4K2 and D5K2 Track-Type Tractor Systems Electronic Control (Power Train System)
D7E Track-Type Tractor Engine Supplement Access Doors/Covers - Remove and Install
335F CR Excavator C7.1 Engine Supplement Hood - Remove and Install - Clean Emissions Module
335F CR Excavator C7.1 Engine Supplement Clean Emissions Module - Remove and Install
926M, 930M and 938M Wheel Loaders Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install
D7E Track-Type Tractor Engine Supplement Turbocharger - Remove and Install
926M, 930M and 938M Wheel Loaders Machine Systems Window Wiper and Wiper Motor (Rear) - Remove and Install
930K Wheel Loader Machine Systems Refrigerant Accumulator - Remove and Install
2014/10/15 Reversing Fan Motor Break-In Procedure On Certain D6K2 Track-Type Tractors That Are Equipped With A Reversing Fan {1356, 1386}
2014/10/21 Improved Engine Harness Assembly Routing Is Now Used on Certain D6N Track-Type Tractors {1000, 1408}
2015/07/22 Improved Tube and Mounting Bracket are Now Used on Certain 988K Wheel Loaders {4257, 5057}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.