Hood - Remove and Install - Clean Emissions Module
- Open latch (3) to hood assembly (1).
- Open hood assembly (2) to the OPEN position.
Show/hide table
Illustration 2 g03737026 - Attach a suitable lifting device to hood assembly (1). The weight of hood assembly (1) is approximately
32 kg (71 lb) . - Remove bolts (4) and hood assembly (1).
Show/hide table
| |
| Illustration 1 | g03736970 |
- Install hood assembly (1) in the reverse order of removal.
Caterpillar Information System:
D7E Track-Type Tractor Engine Supplement Access Doors/Covers - Remove and Install
D3K2, D4K2 and D5K2 Track-Type Tractor Systems Electronic Control (Power Train System)
A New Autolube Pump and Internal Circuit Board Are Now Available for Certain Wheel Loaders and Articulated Trucks {1408, 7516, 7540, 7610, 7620} A New Autolube Pump and Internal Circuit Board Are Now Available for Certain Wheel Loaders and Articulated Trucks {1408, 7516, 7540, 7610, 7620}
2015/01/27 New Engine Software Is Used For Certain D11 Track-Type Tractors {1920, 7620}
2015/03/12 An Improved Window Guide and Rail Are Now Being Used on Certain Wheel Loaders {7310}
335F CR Excavator C7.1 Engine Supplement Hood - Remove and Install - Engine
2014/10/20 An Improved Single Tilt Brace Is Now Used On Certain D9R and D9T Track-Type Tractors {6050, 6061}
335F CR Excavator C7.1 Engine Supplement Flexible Exhaust Pipe - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Coolant Flow - Test
C27 and C32 Engines for Caterpillar Built Machines Aftertreatment Identification Module - Test
335F CR Excavator C7.1 Engine Supplement Soot Sensor - Remove and Install
Fuel Lines Rework on Certain D11T Tier 2 Track-Type Tractors{1274} Fuel Lines Rework on Certain D11T Tier 2 Track-Type Tractors{1274}
335F CR Excavator C7.1 Engine Supplement Clean Emissions Module - Remove and Install
926M, 930M and 938M Wheel Loaders Machine Systems Window Wiper and Wiper Motor (Front) - Remove and Install
D7E Track-Type Tractor Engine Supplement Turbocharger - Remove and Install
926M, 930M and 938M Wheel Loaders Machine Systems Window Wiper and Wiper Motor (Rear) - Remove and Install
930K Wheel Loader Machine Systems Refrigerant Accumulator - Remove and Install
2014/10/15 Reversing Fan Motor Break-In Procedure On Certain D6K2 Track-Type Tractors That Are Equipped With A Reversing Fan {1356, 1386}
2014/10/21 Improved Engine Harness Assembly Routing Is Now Used on Certain D6N Track-Type Tractors {1000, 1408}
2015/07/22 Improved Tube and Mounting Bracket are Now Used on Certain 988K Wheel Loaders {4257, 5057}
3512E Tier 4 Final Engines for Land Electric Drilling Electrical Power Supply - Test
C175-16 Locomotive Engine Clean Emissions Module Has High Oxygen Level
926M, 930M and 938M Wheel Loaders Machine Systems Steering Cylinder - Remove and Install
930K Wheel Loader Machine Systems Brake Accumulator - Remove and Install