Hood - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | 140-7742 | Sleeve | 1 |
- Disconnect clamp (1).
Show/hide table
Illustration 2 g03736894 - Disconnect harness assemblies (2) and the cable straps.
Show/hide table
Illustration 3 g03736899 - Remove cover (3) and disconnect hose assembly (4). Remove exhaust stack (5).
Show/hide table
Illustration 4 g03736929 Note: Use Tooling (A) to protect hose assembly (4) when removing hood (6).
- Disconnect harness assembly for light assembly (8) and disconnect the harness assembly from the hood.
- Attach suitable lifting devices to hood (6). The weight of hood (6) is approximately
50 kg (110 lb) . - Remove bolts (7) and bolt (9) and the mount assemblies.
- Remove hood (6).
Show/hide table
Illustration 1 | g03736641 |
- Install hood (6) in the reverse order of removal.
Caterpillar Information System:
D7E Track-Type Tractor Engine Supplement Pump Drive - Remove and Install
335F CR Excavator C7.1 Engine Supplement Engine Oil Cooler - Remove and Install
335F CR Excavator C7.1 Engine Supplement Fuel Cooler - Remove and Install
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Steering Pump
D6K2 and D6K Track-Type Tractor Systems Crossover Relief Valve (Winch) - Test and Adjust
C280 Marine Engines NOx Conversion Is Low
930K Wheel Loader Machine Systems Cab - Remove and Install
335F CR Excavator C7.1 Engine Supplement Water Separator and Fuel Priming Pump - Remove and Install
D6K2 and D6K Track-Type Tractor Systems Crossover Relief Valve - Test and Adjust - Hydrostatic Stall
Installation of the New Diesel Exhaust Fluid Filter On Certain Tier 4 Final Applications {108K} Installation of the New Diesel Exhaust Fluid Filter On Certain Tier 4 Final Applications {108K}
335F CR Excavator C7.1 Engine Supplement Fuel Filter and Base - Remove and Install
D7E Track-Type Tractor Engine Supplement Hydraulic Oil Cooler - Remove and Install
Fuel Lines Rework on Certain D11T Tier 2 Track-Type Tractors{1274} Fuel Lines Rework on Certain D11T Tier 2 Track-Type Tractors{1274}
335F CR Excavator C7.1 Engine Supplement Soot Sensor - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Aftertreatment Identification Module - Test
C27 and C32 Engines for Caterpillar Built Machines Coolant Flow - Test
335F CR Excavator C7.1 Engine Supplement Flexible Exhaust Pipe - Remove and Install
2014/10/20 An Improved Single Tilt Brace Is Now Used On Certain D9R and D9T Track-Type Tractors {6050, 6061}
335F CR Excavator C7.1 Engine Supplement Hood - Remove and Install - Engine
2015/03/12 An Improved Window Guide and Rail Are Now Being Used on Certain Wheel Loaders {7310}
2015/01/27 New Engine Software Is Used For Certain D11 Track-Type Tractors {1920, 7620}
A New Autolube Pump and Internal Circuit Board Are Now Available for Certain Wheel Loaders and Articulated Trucks {1408, 7516, 7540, 7610, 7620} A New Autolube Pump and Internal Circuit Board Are Now Available for Certain Wheel Loaders and Articulated Trucks {1408, 7516, 7540, 7610, 7620}
D3K2, D4K2 and D5K2 Track-Type Tractor Systems Electronic Control (Power Train System)
D7E Track-Type Tractor Engine Supplement Access Doors/Covers - Remove and Install