Water Separator and Fuel Priming Pump - Remove and Install
- Turn the disconnect switch to the OFF position.
Show/hide table
Illustration 1 g03736458 Show/hide tableIllustration 2 g03736457 - Open door assembly (1) and shut off fuel supply line valve (2).
Show/hide table
Illustration 3 g03736541 - Disconnect hose assemblies (4). Disconnect harness assembly (6). Remove bolts (3) and water separator (5).
Show/hide table
Illustration 4 g03736542 - Disconnect hose assemblies (7) and harness assembly (8). Remove the bolts and fuel priming pump (9).
- Install water separator (5) and fuel priming pump (9) in the reverse order of removal.
Caterpillar Information System:
D6K2 and D6K Track-Type Tractor Systems Crossover Relief Valve - Test and Adjust - Hydrostatic Stall
Installation of the New Diesel Exhaust Fluid Filter On Certain Tier 4 Final Applications {108K} Installation of the New Diesel Exhaust Fluid Filter On Certain Tier 4 Final Applications {108K}
335F CR Excavator C7.1 Engine Supplement Fuel Filter and Base - Remove and Install
D7E Track-Type Tractor Engine Supplement Hydraulic Oil Cooler - Remove and Install
950 GC Wheel Loader Power Train Axle Housing - Assemble
D6K2 and D6K Track-Type Tractor Systems Deceleration/Brake Pedal - Test
950 GC Wheel Loader Power Train Axle Housing - Disassemble
950 GC Wheel Loader Power Train Differential - Assemble
906K, 906M, 907K, 907M, 908K and 908M Compact Wheel Loaders Additional Messages - Only Japanese Market
950 GC Wheel Loader Power Train Differential - Disassemble
950 GC Wheel Loader Power Train Differential Pinion - Assemble
D7E Track-Type Tractor Engine Supplement Engine Oil Pan - Remove and Install
930K Wheel Loader Machine Systems Cab - Remove and Install
C280 Marine Engines NOx Conversion Is Low
D6K2 and D6K Track-Type Tractor Systems Crossover Relief Valve (Winch) - Test and Adjust
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Steering Pump
335F CR Excavator C7.1 Engine Supplement Fuel Cooler - Remove and Install
335F CR Excavator C7.1 Engine Supplement Engine Oil Cooler - Remove and Install
D7E Track-Type Tractor Engine Supplement Pump Drive - Remove and Install
D7E Track-Type Tractor Engine Supplement Hood - Remove and Install
Fuel Lines Rework on Certain D11T Tier 2 Track-Type Tractors{1274} Fuel Lines Rework on Certain D11T Tier 2 Track-Type Tractors{1274}
335F CR Excavator C7.1 Engine Supplement Soot Sensor - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Aftertreatment Identification Module - Test
C27 and C32 Engines for Caterpillar Built Machines Coolant Flow - Test