Fuel Cooler - Remove and Install
Start By:
- Drain the fuel tank. Refer to Operation and Maintenance Manual, "Refill Capacities" for the correct draining and filling procedures.
- Disconnect hose (3) and hoses (4). Remove bolts (1). Remove fuel cooler (2).
Show/hide table
Illustration 1 | g03736595 |
- Install fuel cooler (2) in the reverse order of removal.
Caterpillar Information System:
980L Medium Wheel Loader Power Train, Steering, Braking, Hydraulic, and Machine Systems Steering Pump
D6K2 and D6K Track-Type Tractor Systems Crossover Relief Valve (Winch) - Test and Adjust
C280 Marine Engines NOx Conversion Is Low
930K Wheel Loader Machine Systems Cab - Remove and Install
335F CR Excavator C7.1 Engine Supplement Water Separator and Fuel Priming Pump - Remove and Install
D6K2 and D6K Track-Type Tractor Systems Crossover Relief Valve - Test and Adjust - Hydrostatic Stall
Installation of the New Diesel Exhaust Fluid Filter On Certain Tier 4 Final Applications {108K} Installation of the New Diesel Exhaust Fluid Filter On Certain Tier 4 Final Applications {108K}
335F CR Excavator C7.1 Engine Supplement Fuel Filter and Base - Remove and Install
D7E Track-Type Tractor Engine Supplement Hydraulic Oil Cooler - Remove and Install
950 GC Wheel Loader Power Train Axle Housing - Assemble
D6K2 and D6K Track-Type Tractor Systems Deceleration/Brake Pedal - Test
950 GC Wheel Loader Power Train Axle Housing - Disassemble
335F CR Excavator C7.1 Engine Supplement Engine Oil Cooler - Remove and Install
D7E Track-Type Tractor Engine Supplement Pump Drive - Remove and Install
D7E Track-Type Tractor Engine Supplement Hood - Remove and Install
Fuel Lines Rework on Certain D11T Tier 2 Track-Type Tractors{1274} Fuel Lines Rework on Certain D11T Tier 2 Track-Type Tractors{1274}
335F CR Excavator C7.1 Engine Supplement Soot Sensor - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines Aftertreatment Identification Module - Test
C27 and C32 Engines for Caterpillar Built Machines Coolant Flow - Test
335F CR Excavator C7.1 Engine Supplement Flexible Exhaust Pipe - Remove and Install
2014/10/20 An Improved Single Tilt Brace Is Now Used On Certain D9R and D9T Track-Type Tractors {6050, 6061}
335F CR Excavator C7.1 Engine Supplement Hood - Remove and Install - Engine
2015/03/12 An Improved Window Guide and Rail Are Now Being Used on Certain Wheel Loaders {7310}
2015/01/27 New Engine Software Is Used For Certain D11 Track-Type Tractors {1920, 7620}