Inlet Manifold - Remove
Removal Procedure
Start By:
- Remove the fuel filter base. Refer to Disassembly and Assembly, "Fuel Filter Base - Remove and Install".
- Disconnect the battery. Refer to Operation and Maintenance Manual, "Battery or Battery Cable - Disconnect".
- Remove nuts (6) from inlet manifold (3) .
Show/hide table
Illustration 1 | g01356983 |
- Remove cable straps (4) and disconnect harness assemblies (2) and (5). Position harness assembly out of the way.
- Remove tube assembly (1) .
- Disconnect cable assemblies (7) .
Show/hide table
Illustration 2 | g01357028 |
Show/hide table
Illustration 3 | g01357058 |
- Remove nuts (8) and remove bracket (9) .
- Remove bolts (10) .
- Remove inlet manifold (3) and starting aid (11) .
Caterpillar Information System:
C6.6 Industrial Engine Boost Pressure Sensor
C11 and C13 Petroleum Engines Cylinder Block
C4.4 Industrial Engine Engine Oil Pressure Sensor
CX35 On-Highway Transmission Pump Drive - Install - Rear PTO shaft
C13, C15, and C18 Tier 4 Final Engines Coolant Temperature Sensor
CX35 On-Highway Transmission Pump Drive - Remove - Rear PTO Shaft
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Maintenance Interval Schedule
C4.4 (Mech) Industrial Engine Alternator - Inspect
C18 Marine Auxiliary Engines Speed/Timing - Test
C4.4 (Mech) Industrial Engine After Stopping Engine
C4.4 (Mech) Industrial Engine Before Starting Engine
C4.4 (Mech) Industrial Engine Before Starting Engine
3508C, 3512C and 3516C Marine Engines Fumes Filter - Remove and Install
C4.4 (Mech) Industrial Engine Hoses and Clamps - Inspect/Replace
C4.4 (Mech) Industrial Engine General Hazard Information
C4.4 (Mech) Industrial Engine Maintenance Log
C4.4 (Mech) Industrial Engine Fuel Related Components in Cold Weather
C9 On-highway Engine Inlet Manifold - Install
C175-16 Locomotive Engine Fuel Pressure Sensor
C11 and C13 Engines Fuel Temperature Sensor
C9 On-highway Engine Engine Control Module - Remove and Install
2007/10/15 A New Coupling is Used {3252}
CX35 On-Highway Transmission Transmission and Torque Converter - Separate
C9 On-highway Engine Engine Oil Filter Base - Remove