Fuel Pressure Sensor
Show/hide table
图 1 | g01502573 |
(1) 压力传感器总成的最终安装扭矩 ... 10 ± 2 N·m (90 ± 18 lb in)
工作电压 ... 5.0 ± 0.5 VDC
工作温度 ... −40 到 125 °C (−40 到 257 °F)
Caterpillar Information System:
C9 On-highway Engine Inlet Manifold - Install
C4.4 (Mech) Industrial Engine Fuel Related Components in Cold Weather
C4.4 (Mech) Industrial Engine Maintenance Log
C4.4 (Mech) Industrial Engine General Hazard Information
C4.4 (Mech) Industrial Engine Hoses and Clamps - Inspect/Replace
3508C, 3512C and 3516C Marine Engines Fumes Filter - Remove and Install
C9 On-highway Engine Inlet Manifold - Remove
C6.6 Industrial Engine Boost Pressure Sensor
C11 and C13 Petroleum Engines Cylinder Block
C4.4 Industrial Engine Engine Oil Pressure Sensor
CX35 On-Highway Transmission Pump Drive - Install - Rear PTO shaft
C13, C15, and C18 Tier 4 Final Engines Coolant Temperature Sensor
C11 and C13 Engines Fuel Temperature Sensor
C9 On-highway Engine Engine Control Module - Remove and Install
2007/10/15 A New Coupling is Used {3252}
CX35 On-Highway Transmission Transmission and Torque Converter - Separate
C9 On-highway Engine Engine Oil Filter Base - Remove
CX35 On-Highway Transmission Transmission and Torque Converter - Connect
CX35 On-Highway Transmission Torque Converter Housing - Remove
CX35 On-Highway Transmission Torque Converter Housing - Install
C32 Marine Generator Set Gauges and Indicators
C18 Marine Auxiliary Engine Starting the Engine
C18 Marine Generator Set Cold Weather Starting
C18 Marine Auxiliary Engine Manual Stop Procedure