Maintenance Log
Show/hide table
Modelul motorului | Identificator client | ||||
Serie | Numărul de configuraţie | ||||
Ore de exploatare | Cantitate de combustibil | Element de service | Data (dată) | Autorizare | |
Caterpillar Information System:
C4.4 (Mech) Industrial Engine General Hazard Information
C4.4 (Mech) Industrial Engine Hoses and Clamps - Inspect/Replace
3508C, 3512C and 3516C Marine Engines Fumes Filter - Remove and Install
C9 On-highway Engine Inlet Manifold - Remove
C6.6 Industrial Engine Boost Pressure Sensor
C11 and C13 Petroleum Engines Cylinder Block
C4.4 Industrial Engine Engine Oil Pressure Sensor
CX35 On-Highway Transmission Pump Drive - Install - Rear PTO shaft
C13, C15, and C18 Tier 4 Final Engines Coolant Temperature Sensor
CX35 On-Highway Transmission Pump Drive - Remove - Rear PTO Shaft
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Maintenance Interval Schedule
C4.4 (Mech) Industrial Engine Alternator - Inspect
C4.4 (Mech) Industrial Engine Fuel Related Components in Cold Weather
C9 On-highway Engine Inlet Manifold - Install
C175-16 Locomotive Engine Fuel Pressure Sensor
C11 and C13 Engines Fuel Temperature Sensor
C9 On-highway Engine Engine Control Module - Remove and Install
2007/10/15 A New Coupling is Used {3252}
CX35 On-Highway Transmission Transmission and Torque Converter - Separate
C9 On-highway Engine Engine Oil Filter Base - Remove
CX35 On-Highway Transmission Transmission and Torque Converter - Connect
CX35 On-Highway Transmission Torque Converter Housing - Remove
CX35 On-Highway Transmission Torque Converter Housing - Install
C32 Marine Generator Set Gauges and Indicators