C4.4 (Mech) Industrial Engine Caterpillar


After Stopping Engine

Usage:

C4.4 2L2
Notă Înainte de a verifica uleiul de motor, nu puneţi în funcţiune motorul timp de cel puţin 10 minute, pentru a permite uleiului de motor să revină în baia de ulei.

  • Verificaţi nivelul uleiului din carter. Menţineţi nivelul de ulei între marcajul "MIN" şi marcajul "MAX" de pe joja de ulei.

  • Dacă este necesar, efectuaţi mici reglaje. Remediaţi eventualele scurgeri şi strângeţi şuruburile slăbite.

  • Respectaţi intervalul de service obligatoriu. Efectuaţi întreţinerea indicată în Manualul de operare şi întreţinere, "Programul intervalelor de întreţinere".

  • Umpleţi rezervorul de combustibil pentru a preîntâmpina acumularea de umezeală în combustibil. Nu umpleţi excesiv rezervorul de combustibil.


NOTIFICARE

Utilizaţi numai amestecurile de antigel/agent de răcire recomandate în capitolul Capacităţi de reumplere şi recomandări din Manualul de operare şi întreţinere . În caz contrar, motorul se poate defecta.


  • Lăsaţi motorul să se răcească. Verificaţi nivelul agentului de răcire

  • Dacă se preconizează temperaturi sub limita de îngheţ, verificaţi dacă agentul de răcire oferă o protecţie anti-îngheţ corespunzătoare. Sistemul de răcire trebuie să fie protejat împotriva îngheţului la cele mai mici temperaturi exterioare estimate. Adăugaţi amestecul corect de agent de răcire/apă, dacă este necesar.

  • Efectuaţi toate operaţiunile necesare de întreţinere periodică la toate echipamentele antrenate. Această întreţinere este prezentată în instrucţiunile furnizate de OEM.

Caterpillar Information System:

C4.4 (Mech) Industrial Engine Before Starting Engine
C4.4 (Mech) Industrial Engine Before Starting Engine
C9 On-highway Engine Water Temperature Regulator Housing
C4.4 (Mech) Industrial Engine Engine Shutoffs and Engine Alarms
C4.4 (Mech) Industrial Engine Fuel Shutoff
C4.4 (Mech) Industrial Engine Gauges and Indicators
C4.4 (Mech) Industrial Engine Fuel and the Effect from Cold Weather
C9.3 Engines for Caterpillar Built Machines Air Compressor - Remove and Install
3406E, C-10, C-12, C-15, C-16 Truck Engines Diagnostic Flash Code Retrieval
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Product Storage
C18 Marine Engines Engine Oil Level - Check
Aftertreatment Regeneration Device (ARD) Ignition System on C13 and C15 Engines May Operate with the Keyswitch Off{1722} Aftertreatment Regeneration Device (ARD) Ignition System on C13 and C15 Engines May Operate with the Keyswitch Off{1722}
C18 Marine Auxiliary Engines Speed/Timing - Test
C4.4 (Mech) Industrial Engine Alternator - Inspect
C0.5, C0.7, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Maintenance Interval Schedule
CX35 On-Highway Transmission Pump Drive - Remove - Rear PTO Shaft
C13, C15, and C18 Tier 4 Final Engines Coolant Temperature Sensor
CX35 On-Highway Transmission Pump Drive - Install - Rear PTO shaft
C4.4 Industrial Engine Engine Oil Pressure Sensor
C11 and C13 Petroleum Engines Cylinder Block
C6.6 Industrial Engine Boost Pressure Sensor
C9 On-highway Engine Inlet Manifold - Remove
3508C, 3512C and 3516C Marine Engines Fumes Filter - Remove and Install
C4.4 (Mech) Industrial Engine Hoses and Clamps - Inspect/Replace
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.