Belt Tensioner - Remove and Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 168-0383 | Breaker Bar | 1 |
- Open the engine hood.
Show/hide table
Illustration 1 g02477280 - Remove cover assembly (1).
Show/hide table
Illustration 2 g03357306 Show/hide table
Illustration 3 g03357297 - Remove hose (2) and bolts (4). Remove engine compartment shield (3).
Show/hide table
Illustration 4 g02477300 Machine has been removed for photographic purposes. Note: Note the location of serpentine belt (5) in Illustration 4 for installation.
- Insert Tooling (A) into Location (Y). Use Tooling (A) to release the tension on serpentine belt (5). Pin belt tensioner (7) at Location (X).
- Remove serpentine belt (5). Remove bolt (6) and remove belt tensioner (7).
- Install belt tensioner (7) in the reverse order of removal.
- Tighten bolt (6) to a torque of
41 ± 8 N·m (30 ± 6 lb ft) .
- Tighten bolt (6) to a torque of
Caterpillar Information System:
Installation Instructions for 425-1892 Cold Weather Starting Ar for 966H and 972H Wheel Loader Machines{1450, 1450, 1456, 7610} Installation Instructions for 425-1892 Cold Weather Starting Ar for 966H and 972H Wheel Loader Machines{1450, 1450, 1456, 7610}
980M Tier 4 and 982M Tier 4 Wheel Loaders Hood Panels (Front and Rear) - Remove and Install
990K Wheel Loader Radiator Core - Clean
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Alert Indicators
D10T2 Track-Type Tractor Monitoring System
990K Wheel Loader Receiver Dryer (Refrigerant) - Replace
2013/04/22 An Improved Steering lines Group and Air Lines Group is Now Used on Certain D6N Track-Type Tractors {1071, 4104, 4133, 4304}
966H and 972H Wheel Loaders Steering System Piston Pump (Steering)
D10T2 Track-Type Tractor Fuses and Circuit Breakers - Replace/Reset
966H and 972H Wheel Loaders Power Train Solenoid Valve (Differential Lock)
C9.3 Engines for Caterpillar Built Machines Unit Injector Sleeve - Remove and Install
C4.4 and C7.1 Engines Intake Manifold Air Pressure Is Low
980M Tier 4 and 982M Tier 4 Wheel Loaders Alternator - Remove and Install
836K Landfill Compactor and 834K Wheel Dozer Sensor Signal (Analog, Passive) - Test
980M Tier 4 and 982M Tier 4 Wheel Loaders Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
C9.3 Engines for Caterpillar Built Machines Flywheel - Remove and Install
980L Tier 3 Wheel Loader Engine Supplement Fuel Transfer Pump - Remove and Install
980M Tier 4 and 982M Tier 4 Wheel Loaders Fuel Manifold (ARD) - Remove and Install - Clean Emissions Module
C9.3 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove and Install
980M Tier 4 and 982M Tier 4 Wheel Loaders Ignition Coil - Remove and Install - Clean Emissions Module
621K, 623K, and 627K Wheel Tractor-Scrapers Systems Service and Parking Brake
C9.3 Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove and Install
2013/03/15 Improved Process for Filling the Cooling System on D3500 Generator Sets and Power Modules {1350}
D10T2 Track-Type Tractor Hydraulic System Filter Bypass Screen - Clean