Ignition Coil - Remove and Install - Clean Emissions Module
- Turn the battery disconnect switch to the off position.
- Open the hood.
Show/hide table
Illustration 1 g03357343 Show/hide table
Illustration 2 g03357340 - Remove hose clamp (1) and bolts (3). Remove engine compartment shield (2).
Show/hide table
Illustration 3 g03357351 - Disconnect harness assemblies (5) and (6).
- Remove ignition coil (4)
- Install ignition coil (4) in reverse order of removal.
Caterpillar Information System:
C9.3 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove and Install
980M Tier 4 and 982M Tier 4 Wheel Loaders Fuel Manifold (ARD) - Remove and Install - Clean Emissions Module
980L Tier 3 Wheel Loader Engine Supplement Fuel Transfer Pump - Remove and Install
C9.3 Engines for Caterpillar Built Machines Flywheel - Remove and Install
980M Tier 4 and 982M Tier 4 Wheel Loaders Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
836K Landfill Compactor and 834K Wheel Dozer Sensor Signal (Analog, Passive) - Test
980M Tier 4 and 982M Tier 4 Wheel Loaders Alternator - Remove and Install
980M Tier 4 and 982M Tier 4 Wheel Loaders Belt Tensioner - Remove and Install
Installation Instructions for 425-1892 Cold Weather Starting Ar for 966H and 972H Wheel Loader Machines{1450, 1450, 1456, 7610} Installation Instructions for 425-1892 Cold Weather Starting Ar for 966H and 972H Wheel Loader Machines{1450, 1450, 1456, 7610}
980M Tier 4 and 982M Tier 4 Wheel Loaders Hood Panels (Front and Rear) - Remove and Install
990K Wheel Loader Radiator Core - Clean
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Alert Indicators
621K, 623K, and 627K Wheel Tractor-Scrapers Systems Service and Parking Brake
C9.3 Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove and Install
2013/03/15 Improved Process for Filling the Cooling System on D3500 Generator Sets and Power Modules {1350}
D10T2 Track-Type Tractor Hydraulic System Filter Bypass Screen - Clean
D10T2 Track-Type Tractor Capacities (Refill)
D10T2 Track-Type Tractor Lubricant Viscosities - Fluids Recommendations
D10T2 Track-Type Tractor Additional Messages
D10T2 Track-Type Tractor Sound Information and Vibration Information
D10T2 Track-Type Tractor Specifications
C9.3 Engines for Caterpillar Built Machines Housing (Front) - Remove and Install
C9.3 Engines for Caterpillar Built Machines Compression Brake - Remove and Install
C9.3 Engines for Caterpillar Built Machines Rocker Arm and Shaft - Remove and Install