Fuel Transfer Pump - Remove and Install
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Open the engine hood. Remove the engine side panel on the right side of the machine.
Show/hide table
Illustration 1 g03357321 - Disconnect hose assemblies (2).
- Remove bolts (1) and remove fuel transfer pump (3).
- Install fuel transfer pump (3) in the reverse order of removal.
Caterpillar Information System:
C9.3 Engines for Caterpillar Built Machines Flywheel - Remove and Install
980M Tier 4 and 982M Tier 4 Wheel Loaders Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
836K Landfill Compactor and 834K Wheel Dozer Sensor Signal (Analog, Passive) - Test
980M Tier 4 and 982M Tier 4 Wheel Loaders Alternator - Remove and Install
980M Tier 4 and 982M Tier 4 Wheel Loaders Belt Tensioner - Remove and Install
Installation Instructions for 425-1892 Cold Weather Starting Ar for 966H and 972H Wheel Loader Machines{1450, 1450, 1456, 7610} Installation Instructions for 425-1892 Cold Weather Starting Ar for 966H and 972H Wheel Loader Machines{1450, 1450, 1456, 7610}
980M Tier 4 and 982M Tier 4 Wheel Loaders Hood Panels (Front and Rear) - Remove and Install
990K Wheel Loader Radiator Core - Clean
D-Series and D2-Series Compact Track Loaders (CTL), Multi-Terrain Loaders (MTL), and Skid Steer Loaders (SSL) Alert Indicators
D10T2 Track-Type Tractor Monitoring System
990K Wheel Loader Receiver Dryer (Refrigerant) - Replace
2013/04/22 An Improved Steering lines Group and Air Lines Group is Now Used on Certain D6N Track-Type Tractors {1071, 4104, 4133, 4304}
980M Tier 4 and 982M Tier 4 Wheel Loaders Fuel Manifold (ARD) - Remove and Install - Clean Emissions Module
C9.3 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove and Install
980M Tier 4 and 982M Tier 4 Wheel Loaders Ignition Coil - Remove and Install - Clean Emissions Module
621K, 623K, and 627K Wheel Tractor-Scrapers Systems Service and Parking Brake
C9.3 Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove and Install
2013/03/15 Improved Process for Filling the Cooling System on D3500 Generator Sets and Power Modules {1350}
D10T2 Track-Type Tractor Hydraulic System Filter Bypass Screen - Clean
D10T2 Track-Type Tractor Capacities (Refill)
D10T2 Track-Type Tractor Lubricant Viscosities - Fluids Recommendations
D10T2 Track-Type Tractor Additional Messages
D10T2 Track-Type Tractor Sound Information and Vibration Information
D10T2 Track-Type Tractor Specifications