Service and Parking Brake
Show/hide table
| |
| Illustration 1 | g03453496 |
|
Front view | |
Show/hide table
| Specification for 419-8251 Service and Parking Brake Gp | |||
| Item | Qty | Part | Specification Description |
| 1 | 6 | 6E-1299 Spring | Length under test force is |
| Test force is |
|||
| Free length after test is |
|||
| 2 | 1 | 247-8269 Damper | Thickness is |
| 3 | 6 | 366-2523 Outer Plate | Thickness of one new outer plate is |
| Minimum permissible wear thickness is |
|||
| 4 | 6 | 8E-2183 Friction Disc | Lubricate the friction disc at assembly using the liquid being sealed.
Thickness of one new friction disc The minimum reusable thickness for one disc is |
Show/hide table
| |
| Illustration 2 | g03453497 |
|
Rear view | |
Show/hide table
| Item | Qty | Part | Specification Description |
| 5 | 5 | 244-2306 Nut | Torque nut to |
| 6 | 5 | 246-5451 Taperlock Stud | Torque stud to |
Caterpillar Information System:
980M Tier 4 and 982M Tier 4 Wheel Loaders Ignition Coil - Remove and Install - Clean Emissions Module
C9.3 Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove and Install
980M Tier 4 and 982M Tier 4 Wheel Loaders Fuel Manifold (ARD) - Remove and Install - Clean Emissions Module
980L Tier 3 Wheel Loader Engine Supplement Fuel Transfer Pump - Remove and Install
C9.3 Engines for Caterpillar Built Machines Flywheel - Remove and Install
980M Tier 4 and 982M Tier 4 Wheel Loaders Fuel Priming Pump and Primary Filter (Water Separator) - Remove and Install
836K Landfill Compactor and 834K Wheel Dozer Sensor Signal (Analog, Passive) - Test
980M Tier 4 and 982M Tier 4 Wheel Loaders Alternator - Remove and Install
980M Tier 4 and 982M Tier 4 Wheel Loaders Belt Tensioner - Remove and Install
Installation Instructions for 425-1892 Cold Weather Starting Ar for 966H and 972H Wheel Loader Machines{1450, 1450, 1456, 7610} Installation Instructions for 425-1892 Cold Weather Starting Ar for 966H and 972H Wheel Loader Machines{1450, 1450, 1456, 7610}
980M Tier 4 and 982M Tier 4 Wheel Loaders Hood Panels (Front and Rear) - Remove and Install
990K Wheel Loader Radiator Core - Clean
C9.3 Engines for Caterpillar Built Machines Crankshaft Front Seal - Remove and Install
2013/03/15 Improved Process for Filling the Cooling System on D3500 Generator Sets and Power Modules {1350}
D10T2 Track-Type Tractor Hydraulic System Filter Bypass Screen - Clean
D10T2 Track-Type Tractor Capacities (Refill)
D10T2 Track-Type Tractor Lubricant Viscosities - Fluids Recommendations
D10T2 Track-Type Tractor Additional Messages
D10T2 Track-Type Tractor Sound Information and Vibration Information
D10T2 Track-Type Tractor Specifications
C9.3 Engines for Caterpillar Built Machines Housing (Front) - Remove and Install
C9.3 Engines for Caterpillar Built Machines Compression Brake - Remove and Install
C9.3 Engines for Caterpillar Built Machines Rocker Arm and Shaft - Remove and Install
C9.3 Engines for Caterpillar Built Machines Camshaft - Remove and Install