Engine Oil Pan
Show/hide table
Illustration 1 | g01515715 |
Shallow sump |
(1) Torque for three pipe plugs ... 82 ± 10 N·m (60 ± 7 lb ft)
(2) Lubricate the bore of two O-ring seals lightly with the lubricant that is being sealed.
(3) Torque for the drain plug ... 70 ± 15 N·m (50 ± 11 lb ft)
Caterpillar Information System:
C11 and C13 Engines and 14M and 16M Motor Graders Starting Aid - Test
Adapting the Jacobs Brake Module Function{1119, 1129} Adapting the Jacobs Brake Module Function{1119, 1129}
C13 On-highway Engine Electric Starting Motor
C15 and C18 Engines for Caterpillar Built Machines Speed/Timing - Test
3512B Marine Auxiliary Engine Starting Motor - Inspect
3512B Marine Auxiliary Engine Speed Sensor - Clean/Inspect
C11 and C13 Engines and 14M and 16M Motor Graders Speed Control (Switch) - Test
G3520C and G3520E Generator Set Engines Sensor Signal (Analog, Active) - Test
G3520C and G3520E Generator Set Engines Generator Output Power - Test
G3520C and G3520E Generator Set Engines Sensor Signal (Analog, Passive) - Test
3500 Engines Air Shutoff - Remove and Install
C15 On-Highway Engine Vibration Damper and Pulley
G3520C and G3520E Generator Set Engines Sensor Supply - Test
G3520C and G3520E Engines Flywheel Housing
G3520C and G3520E Generator Set Engines Engine Speed - Test
C13 On-highway Engine Engine Oil Pump
CX28 On-Highway Transmission Relief Valve (Transmission Hydraulic Control) - Test and Adjust
CX28 On-Highway Transmission Power Train Pressures
C15 On-Highway Engine Belt Tensioner
2013/08/21 Improved Software for Caterpillar Digital Voltage Regulator (CDVR) Now Available {4467, 7620}
C15 and C18 Petrolem Generator Set Engines Coolant Contains Oil
Main Termination Blocks on Gensets{7553} Main Termination Blocks on Gensets{7553}
3524B and C175 Engines for Off-Highway Truck/Tractors Engine Design
C11 and C13 Engines and 14M and 16M Motor Graders Retarder - Test