Cylinder Liner
Removal Procedure
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 173-5527 (1) | Cylinder Pack Puller | 1 |
| 1U-9897 (1) | Bridge | 1 | |
| B | 2P-8260 | Cylinder Liner Installer | 1 |
| C | 5P-3975 | Rubber Lubricant | 1 |
Show/hide table
| ( 1 ) | 5P-8665 Cylinder Liner Puller Gp is an optional Tool for removing the cylinder liner. |
Start By:
- Remove the pistons and connecting rods.
Show/hide table
| NOTICE |
|---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
- Use Tooling (A) to remove cylinder liners (1) .
Show/hide table
 | |
| Illustration 1 | g01138987 |
- Remove the seals from cylinder liners (1) .
Installation Procedure
- Install cylinder liners (1) in the reverse order of removal.
- Check the cylinder liner projection. Refer to Testing and Adjusting, "Cylinder Liner Projection - Inspect".
- Apply Tooling (C) to new seal (2). Install new seal (2) in the machined groove on cylinder liner (1) .
Show/hide table
Illustration 2 g01139009
- Lubricate the lower portion of cylinder liner (1) with clean engine oil. Ensure that the corresponding crankshaft throw is at the bottom center. Use Tooling (B) to install cylinder liner (1) .
Caterpillar Information System:
D6T Track-Type Tractor Machine Systems Case and Frame
994H Wheel Loader Steering System Steering Control Support
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Air Conditioning System Electrical Schematic
2010/12/20 New High Intensity Discharge Flood Lamp Groups Are Now Used on Certain Cat Products {1434}
992K Wheel Loader Machine Systems Piston Pump (Steering) - Remove and Install
D6T Track-Type Tractor Electronic Control Systems Electronic Control Module (ECM) - Configure
2010/12/16 A New Top Liner Seal Is Used on 3500 Engines {1201, 7555}
966K XE Wheel Loader Power Train Transmission Control - Includes Transmission Controls
2011/03/04 Improved Tilt Cylinder Pin Assembly Procedure Reduces Tilt Line Fouling {5057, 5104}
966K Wheel Loader Cooling System Coolant (ELC) - Change
D8T Track-Type Tractor Tracks
D6T Track-Type Tractor Power Train Lubrication Distribution Valve - Remove and Install
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Air Conditioning and Heating System Relay Operation
994H Wheel Loader Power Train Transmission - Remove
994H Wheel Loader Power Train Transmission - Install
D6T Track-Type Tractor Machine Systems including Specifications Refrigerant Condenser
D6T Track-Type Tractor Machine Systems including Specifications Tilt Cylinder (Bulldozer) - VPAT
AD55 Underground Articulated Truck Braking System Solenoid Valve (Retarder Control)
AD30 Underground Articulated Truck Torque Converter - Disassemble
D8T Track-Type Tractor Power Train Track Roller - Double Flange
D8T Track-Type Tractor Power Train Track Roller - Single Flange
D8T TRACK-TYPE TRACTORS Machine Systems Sweep Group
PL83 and PL87 Pipelayer Systems Segmented Sprocket (Drive)
C27 and C32 Tier 4 Engines Fan Adapter Fastener