D6T Track-Type Tractor Power Train Caterpillar


Lubrication Distribution Valve - Remove and Install

Usage:

D6T XW CG8

Removal Procedure

Start By:

  1. Remove the rear bottom guard.

  1. Drain the transmission oil into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Transmission System Oil - Change".


    Illustration 1g01198702

  2. Disconnect hose assemblies (1) and bolts (2). Remove lubrication distribution valve (3).

Disassembly Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty 
1P-1861  Retaining Ring Pliers 


    Illustration 2g01198711

  1. Remove O-rings (1). Use Tooling (A) in order to remove retaining ring (5). Remove retainer (4), valve (3), and O-ring seal (2).

Assembly Procedure

Table 2
Required Tools 
Tool  Part Number  Part Description  Qty 
1P-1861  Retaining Ring Pliers 


    Illustration 3g01198711

  1. Install O-ring seal (2), valve (3), and retainer (4). Use Tooling (A) in order to install retaining ring (5). Install O-ring seals (1).

Installation Procedure

  1. Install lubrication distribution valve (3) in the reverse order of removal.

Caterpillar Information System:

D6T Track-Type Tractor Power Train Pivot Shaft - Remove and Install
950K and 962K Wheel Loaders Camera - Clean
950K and 962K Wheel Loaders Roading Fender Control - If Equipped
D8T Track-Type Tractor Power Train Suction Screen
D6T Track-Type Tractor Hydraulic System Control Manifold - Pilot
D6T Track-Type Tractor Hydraulic System Cylinder Mounting
2010/12/20 "Heavy Duty" Angle Cylinder Seal Is Available For D3K, D4K, And D5K {5101}
D6T Track-Type Tractor Hydraulic System Quick-Drop Valve
2011/04/22 A New Speed Sensor Group Is Now Available for Certain D3G, D4G, D5G, D3K, D4K, and D5K Small Track-Type Tractors {1907}
D6T Track-Type Tractor Engine including Specifications Valve Mechanism Cover
992K Wheel Loader Machine Systems Hydraulic Tank (Steering, Brake) - Assemble
992K Wheel Loader Machine Systems Hydraulic Tank (Steering, Brake) - Disassemble
D8T Track-Type Tractor Tracks
966K Wheel Loader Cooling System Coolant (ELC) - Change
2011/03/04 Improved Tilt Cylinder Pin Assembly Procedure Reduces Tilt Line Fouling {5057, 5104}
966K XE Wheel Loader Power Train Transmission Control - Includes Transmission Controls
2010/12/16 A New Top Liner Seal Is Used on 3500 Engines {1201, 7555}
D6T Track-Type Tractor Electronic Control Systems Electronic Control Module (ECM) - Configure
992K Wheel Loader Machine Systems Piston Pump (Steering) - Remove and Install
2010/12/20 New High Intensity Discharge Flood Lamp Groups Are Now Used on Certain Cat Products {1434}
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Air Conditioning System Electrical Schematic
994H Wheel Loader Steering System Steering Control Support
D6T Track-Type Tractor Machine Systems Case and Frame
D6T Track-Type Tractor Engine including Specifications Cylinder Liner
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.