966K XE Wheel Loader Power Train Caterpillar


Transmission Control - Includes Transmission Controls

Usage:

966K XE NGX



Illustration 1g03069421

Table 1
Specification for 285-8010 Steering Control and Mounting Gp    
Item     Qty     Part     Specification Description    
1     14     9X-2043 Screw     Torque to
6 ± 1 N·m (53 ± 95 lb in).    
2     3     138-8454 Screw     Torque to
1.7 ± 0.4 N·m (15.0 ± 3.5 lb in).    
4     2     137-6723 Flat Head Screw     Torque to
0.9 ± 0.2 N·m (8.0 ± 1.8 lb in).    



Illustration 2g03069424

Table 2
Item     Qty     Part     Specification Description    
5     1     369-1863 Cable As     Assembly the cable assembly at the center position of the lever assembly. Route the cable in between bracket assembly and joystick assembly, as shown in the Illustration 2.    
6     2     6V-9325 Screw     Apply blue Loctite 242 to threads.    
7     4     9X-2044 Screw     Torque to
6 ± 1 N·m (53 ± 95 lb in).    

285-8006 Steering Control Support Gp (3)




Illustration 3g03069425

Table 3
Specification for 285-8006 Steering Control Support Gp    
Item     Qty     Part     Specification Description    
8     2     282-4082 Ball Stud     Torque to
15 ± 3 N·m (133 ± 27 lb in).    
9     2     9X-2045 Screw     Torque to
2.50 ± 0.25 N·m (22.13 ± 2.21 lb in).    
10     2     9X-2043 Screw     Torque to
6 ± 1 N·m (53 ± 95 lb in).    
11     1     9X-2041 Screw     Torque to
50 ± 10 N·m (37 ± 7 lb ft).    

289-2078 Steering Control Support Gp (12)




Illustration 4g03111337

Table 4
Specification for 289-2078 Steering Control Support Gp    
Item     Qty     Part     Specification Description    
13     1     7D-7453 Setscrew     Apply blue Loctite 242 to threads.    
14     1     266-3214 Pin     Torque to
55 ± 10 N·m (41 ± 7 lb ft).    
15     1     9X-2043 Screw     Torque to
6 ± 1 N·m (53 ± 95 lb in).    
16     1     7D-9708 Special Bolt     Apply blue Loctite 242 to threads.
Torque to
10 ± 2 N·m (89 ± 18 lb in).    
17     1     244-2115 Pin     Pin must be flush with surface as shown on housing.    

Caterpillar Information System:

2011/03/04 Improved Tilt Cylinder Pin Assembly Procedure Reduces Tilt Line Fouling {5057, 5104}
966K Wheel Loader Cooling System Coolant (ELC) - Change
D8T Track-Type Tractor Tracks
D6T Track-Type Tractor Power Train Lubrication Distribution Valve - Remove and Install
D6T Track-Type Tractor Power Train Pivot Shaft - Remove and Install
950K and 962K Wheel Loaders Camera - Clean
950K and 962K Wheel Loaders Roading Fender Control - If Equipped
D8T Track-Type Tractor Power Train Suction Screen
D6T Track-Type Tractor Hydraulic System Control Manifold - Pilot
D6T Track-Type Tractor Hydraulic System Cylinder Mounting
2010/12/20 "Heavy Duty" Angle Cylinder Seal Is Available For D3K, D4K, And D5K {5101}
D6T Track-Type Tractor Hydraulic System Quick-Drop Valve
2010/12/16 A New Top Liner Seal Is Used on 3500 Engines {1201, 7555}
D6T Track-Type Tractor Electronic Control Systems Electronic Control Module (ECM) - Configure
992K Wheel Loader Machine Systems Piston Pump (Steering) - Remove and Install
2010/12/20 New High Intensity Discharge Flood Lamp Groups Are Now Used on Certain Cat Products {1434}
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Air Conditioning System Electrical Schematic
994H Wheel Loader Steering System Steering Control Support
D6T Track-Type Tractor Machine Systems Case and Frame
D6T Track-Type Tractor Engine including Specifications Cylinder Liner
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Air Conditioning and Heating System Relay Operation
994H Wheel Loader Power Train Transmission - Remove
994H Wheel Loader Power Train Transmission - Install
D6T Track-Type Tractor Machine Systems including Specifications Refrigerant Condenser
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.