966K Wheel Loader Caterpillar


Cooling System Coolant (ELC) - Change

Usage:

966K XE NGX

------ WARNING! ------

增压系统: 热的冷却液能造成严重的烫伤。 为了打开盖子,要停机,等候散热器冷下来。 然后慢慢松开盖子,释放压力。



注意

在进行检验、保养、测试、调整及维修产品期间,必须小心以确保装好排放出的油液。 在打开任何舱室或解体任何储有液体的部件之前,要准备好合适的容器收集液体。

有关收集和盛接 Cat 产品上油液的适用工具和用品,请参阅专门出版物, NENG2500, "代理商维修工具目录"。

按照当地法规和要求处置所有液体。



注意

将卡特彼勒 ELC 加上或混和其它不符合 卡特彼勒 EC-1 技术参数的产品会降低冷却液的功效、缩短冷却液的工作寿命并会造成部件过早磨损。

对于预混合或浓缩的冷却液,只能使用卡特彼勒 产品或符合卡特彼勒EC-1 规格的市售产品。 延长剂只能用于卡特彼勒 ELC。

不遵循这些建议会缩短冷却系统零部件的寿命。


如果原先使用的是长效冷却液,就需要用清水把冷却系统冲洗干净。 不需要其他的清洁剂。 使用下述程序来更换长效冷却液。

冷却系统压力盖位于机器后端发动机罩下面。




图 1g02158440

  1. 缓慢松开冷却系统压力盖以释放系统压力。 冷却液箱位于机器左侧发动机罩下方。



    图 2g02498297

  1. 打开底部散热器管上的排放阀。 排放阀在燃油加注口后面。 排放阀可从机器的左边靠近。 将冷却液排放到适当的容器中。

  1. 用净水冲刷冷却系统直到排出的水清澈为止。 关闭排放阀。

  1. 更换水温调节器。

    参考关于正确的更换步骤,请参阅操纵和保养手册, "冷却系统水温调节器 - 更换"。

  1. 加入 ELC(Extended Life Coolant,长效冷却液)。

    参考有关冷却系统的加注容量,请参阅操作和保养手册, "加注容量"。

  1. 起动发动机。 在不盖冷却系统加注口盖的情况下运转发动机,直到水温调节器开启,冷却液液位稳定为止。

  1. 保持冷却液液位在冷却液箱的 "MAX" 和 "MIN" 标线之间。

  1. 安装冷却系统压力盖。 关闭发动机。

Caterpillar Information System:

D8T Track-Type Tractor Tracks
D6T Track-Type Tractor Power Train Lubrication Distribution Valve - Remove and Install
D6T Track-Type Tractor Power Train Pivot Shaft - Remove and Install
950K and 962K Wheel Loaders Camera - Clean
950K and 962K Wheel Loaders Roading Fender Control - If Equipped
D8T Track-Type Tractor Power Train Suction Screen
D6T Track-Type Tractor Hydraulic System Control Manifold - Pilot
D6T Track-Type Tractor Hydraulic System Cylinder Mounting
2010/12/20 "Heavy Duty" Angle Cylinder Seal Is Available For D3K, D4K, And D5K {5101}
D6T Track-Type Tractor Hydraulic System Quick-Drop Valve
2011/04/22 A New Speed Sensor Group Is Now Available for Certain D3G, D4G, D5G, D3K, D4K, and D5K Small Track-Type Tractors {1907}
D6T Track-Type Tractor Engine including Specifications Valve Mechanism Cover
2011/03/04 Improved Tilt Cylinder Pin Assembly Procedure Reduces Tilt Line Fouling {5057, 5104}
966K XE Wheel Loader Power Train Transmission Control - Includes Transmission Controls
2010/12/16 A New Top Liner Seal Is Used on 3500 Engines {1201, 7555}
D6T Track-Type Tractor Electronic Control Systems Electronic Control Module (ECM) - Configure
992K Wheel Loader Machine Systems Piston Pump (Steering) - Remove and Install
2010/12/20 New High Intensity Discharge Flood Lamp Groups Are Now Used on Certain Cat Products {1434}
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Air Conditioning System Electrical Schematic
994H Wheel Loader Steering System Steering Control Support
D6T Track-Type Tractor Machine Systems Case and Frame
D6T Track-Type Tractor Engine including Specifications Cylinder Liner
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Air Conditioning and Heating System Relay Operation
994H Wheel Loader Power Train Transmission - Remove
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.