Tracks
Show/hide table
| |
| Illustration 1 | g03404353 |
Show/hide table
| Specification For 272-6009 Track Link As(1) | |||
| Item | Qty | Part | Specification Description |
| - | - | - | Use the following procedure to tighten the track bolts: |
| 1. Tighten the track bolts to |
|||
| 2. Tighten the track bolts to an additional turn of 120 ± 5 degrees. | |||
| - | - | - | The maximum assembly force for the track link assembly is |
| - | - | - | The reference setting force is |
| - | - | - | The plug (2) must not be recessed below the surface of the stopper (3) after assembly. |
| A | - | - | Distance from the end of the plug (2) to the surface of the stopper (3) is |
| B | - | - | Distance from the end of the pin (1) to the surface of the stopper (3) is |
| C | - | - | Bushing protrusion at each end is |
| D | - | - | Protrusion at one end of the pin is |
| E | - | - | Distance between the bolt hole is |
| F | - | - | Distance between the bolt holes is |
| G | - | - | Distance between the bolt holes is |
| H | - | - | Distance between the bolt holes is |
| - | - | - | End play for the link assembly is |
Show/hide table
| (1) | All joints of the link assembly must have flexibility even with a measurable end play of zero. Flexibility is the ability for movement from the weight of the link assembly. |
Caterpillar Information System:
D6T Track-Type Tractor Power Train Lubrication Distribution Valve - Remove and Install
D6T Track-Type Tractor Power Train Pivot Shaft - Remove and Install
950K and 962K Wheel Loaders Camera - Clean
950K and 962K Wheel Loaders Roading Fender Control - If Equipped
D8T Track-Type Tractor Power Train Suction Screen
D6T Track-Type Tractor Hydraulic System Control Manifold - Pilot
D6T Track-Type Tractor Hydraulic System Cylinder Mounting
2010/12/20 "Heavy Duty" Angle Cylinder Seal Is Available For D3K, D4K, And D5K {5101}
D6T Track-Type Tractor Hydraulic System Quick-Drop Valve
2011/04/22 A New Speed Sensor Group Is Now Available for Certain D3G, D4G, D5G, D3K, D4K, and D5K Small Track-Type Tractors {1907}
D6T Track-Type Tractor Engine including Specifications Valve Mechanism Cover
992K Wheel Loader Machine Systems Hydraulic Tank (Steering, Brake) - Assemble
966K Wheel Loader Cooling System Coolant (ELC) - Change
2011/03/04 Improved Tilt Cylinder Pin Assembly Procedure Reduces Tilt Line Fouling {5057, 5104}
966K XE Wheel Loader Power Train Transmission Control - Includes Transmission Controls
2010/12/16 A New Top Liner Seal Is Used on 3500 Engines {1201, 7555}
D6T Track-Type Tractor Electronic Control Systems Electronic Control Module (ECM) - Configure
992K Wheel Loader Machine Systems Piston Pump (Steering) - Remove and Install
2010/12/20 New High Intensity Discharge Flood Lamp Groups Are Now Used on Certain Cat Products {1434}
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Air Conditioning System Electrical Schematic
994H Wheel Loader Steering System Steering Control Support
D6T Track-Type Tractor Machine Systems Case and Frame
D6T Track-Type Tractor Engine including Specifications Cylinder Liner
312E, 312F, 313F, 316E, 316F, 318E, 318F, 320E, 320F, 323E, 323F, 324E, 325F, 326F, 329E, 329F, 330F, 335F, 336E, 336F, 340F, 349E, 349F, 352F, 374F and 390F Excavators and 336E MHPU and 349E MHPU Mobile Hydraulic Power Units Air Conditioning and Hea Air Conditioning and Heating System Relay Operation