C13 Engines for Caterpillar Built Machines Caterpillar


Diesel Particulate Filter

Usage:

623H DBF



Illustration 1g02559920

Table 1
Specification for 362-9515 Diesel Particulate Filter Gp    
Item     Qty     Part     Specification Description    
A     -     -     Angle between outlet module assembly and clamps is 38 ± 5 degrees.    
B     -     -     Angle between the outlet module assembly and inlet module assembly is 88.0 ± 0.8 degrees.    
1     2     345-1839 Clamp     Orient the clamps as shown in Illustration 1 and torque to
50.0 ± 2.5 N·m (36.9 ± 1.8 lb ft).
After installation, use high temperature permanent marker to create a circumferential mark on the inlet module assembly, filter assembly, and outlet module assembly. using the edges of the clamps as a guide. These marks are to indicate clamps location after service,    

Caterpillar Information System:

D11T Track-Type Tractor Hydraulic System Fan Drive Motor
980K Wheel Loader Electrohydraulic System Ride Control Accumulator
980K Wheel Loader Electrohydraulic System Piston Pump (Implement)
D11T Track-Type Tractor Lubricant Viscosities - Fluids Recommendations
D11T Track-Type Tractor Power Train Final Drive - Assemble
C9.3 Tier 4 Final Engines Exhaust Diffuser Adapter
Replacement Procedure for STIC Control Bracket on 993K Wheel Loaders{3033} Replacement Procedure for STIC Control Bracket on 993K Wheel Loaders{3033}
950K and 962K Wheel Loaders Windows - Clean
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System MID 027 - CID 0590 - FMI 12
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System MID 027 - CID 0590 - FMI 09
950K and 962K Wheel Loaders Window Wiper - Inspect/Replace
950K and 962K Wheel Loaders Window Washer Reservoir - Fill
D11T Track-Type Tractor Hydraulic System Dual Tilt Control Valve
2010/11/24 Improvement To The Hydraulic Tank Implement Return Tube Are Now Used On The D8T {5056}
D6T Track-Type Tractor Engine and Machine Warm-Up
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570} Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
953D Welding Tractor Safety Messages
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System MID 027 - CID 0590 - FMI 02
D11T Track-Type Tractor Hydraulic System Bypass Valve (Hydraulic Oil Cooler)
C13, C15, and C18 Tier 4 Final Engines Exhaust Lines (DPF Inlet)
Installation Of Differential Steering Control Update On The D6T, D7E, And D8T Track-Type Tractors{5063, 5705} Installation Of Differential Steering Control Update On The D6T, D7E, And D8T Track-Type Tractors{5063, 5705}
C6.6 Industrial Engine Diesel Particulate Filter - Install
C6.6 Industrial Engine Diesel Particulate Filter - Remove
D11T Track-Type Tractor Hydraulic System Bulldozer Control Valve
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.