Fan Drive Motor
Show/hide table
 | |
| 图 1 | g02690236 |
Show/hide table
| 355-2403 活塞马达总成 的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 1 | 1 | 9S-8006 O 形圈螺塞 | 拧紧至扭矩为 105 ± 10 N·m (77 ± 7 lb ft)。 |
| 2 | 2 | 8T-3957 螺栓 | 拧紧至扭矩为 72 ± 15 N·m (53 ± 11 lb ft)。 |
| 3 | 4 | 095-0670 螺栓 | 拧紧至扭矩为 72 ± 15 N·m (53 ± 11 lb ft)。 |
马达旋转总成
Show/hide table
 | |
| 图 2 | g02690316 |
Show/hide table
| 247-6303 马达旋转总成 的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| 4 | 根据需要使用下述垫片以便达到尺寸 (A) 。 | ||
| 2 | 9T-1576 垫片 | 厚度为 0.10 mm (0.004 in)。 |
|
| 2 | 9T-1579 垫片 | 厚度为 0.30 mm (0.012 in)。 |
|
| A | - | - | 尺寸为 111.20 至 111.30 mm (4.378 ± 4.382 in)。 |
| 5 | 7 | 113-4420 螺钉 | 将蓝色 Loctite 242 涂抹在螺纹上。 |
| 拧紧至扭矩为 15.5 ± 1.5 N·m (137.2 ± 13.3 lb in)。 |
|||
| 6 | 1 | 171-3061 弹簧 | 自由长度为 47.90 mm (1.886 in)。 |
| 7 | 安装壳体时，根据需要使用下述垫片以便达到尺寸 (B) 。 | ||
| 1 | 171-3060 垫片 | 厚度为 3.60 mm (0.142 in)。 |
|
| 1 | 171-3059 垫片 | 厚度为 3.70 mm (0.146 in)。 |
|
| 1 | 171-3058 垫片 | 厚度为 3.80 mm (0.150 in)。 |
|
| 1 | 171-3057 垫片 | 厚度为 3.90 mm (0.154 in)。 |
|
| 1 | 171-3055 垫片 | 厚度为 4.00 mm (0.157 in)。 |
|
| B | - | - | 尺寸为 0.325 ± 0.075 mm (0.0128 ± 0.0030 in)。 |
Caterpillar Information System:
980K Wheel Loader Electrohydraulic System Ride Control Accumulator
980K Wheel Loader Electrohydraulic System Piston Pump (Implement)
D11T Track-Type Tractor Lubricant Viscosities - Fluids Recommendations
D11T Track-Type Tractor Power Train Final Drive - Assemble
C9.3 Tier 4 Final Engines Exhaust Diffuser Adapter
Replacement Procedure for STIC Control Bracket on 993K Wheel Loaders{3033} Replacement Procedure for STIC Control Bracket on 993K Wheel Loaders{3033}
950K and 962K Wheel Loaders Windows - Clean
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System MID 027 - CID 0590 - FMI 12
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System MID 027 - CID 0590 - FMI 09
950K and 962K Wheel Loaders Window Wiper - Inspect/Replace
950K and 962K Wheel Loaders Window Washer Reservoir - Fill
950K and 962K Wheel Loaders Steering Pilot Oil Screen (Command Control Steering) - Clean/Replace
C13 Engines for Caterpillar Built Machines Diesel Particulate Filter
D11T Track-Type Tractor Hydraulic System Dual Tilt Control Valve
2010/11/24 Improvement To The Hydraulic Tank Implement Return Tube Are Now Used On The D8T {5056}
D6T Track-Type Tractor Engine and Machine Warm-Up
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570} Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
953D Welding Tractor Safety Messages
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System MID 027 - CID 0590 - FMI 02
D11T Track-Type Tractor Hydraulic System Bypass Valve (Hydraulic Oil Cooler)
C13, C15, and C18 Tier 4 Final Engines Exhaust Lines (DPF Inlet)
Installation Of Differential Steering Control Update On The D6T, D7E, And D8T Track-Type Tractors{5063, 5705} Installation Of Differential Steering Control Update On The D6T, D7E, And D8T Track-Type Tractors{5063, 5705}
C6.6 Industrial Engine Diesel Particulate Filter - Install
C6.6 Industrial Engine Diesel Particulate Filter - Remove