C13, C15, and C18 Tier 4 Final Engines Caterpillar


Exhaust Lines (DPF Inlet)

Usage:

826K 232


Illustration 1g02565557

Table 1
Specification for 343-8994 Exhaust Lines Gp, 346-6036 Exhaust Lines Gp, and 347-2250 Exhaust Lines Gp 
Item   Qty  Part  Specification Description 
346-0335 Band Clamp  Torque to 35 ± 2 N·m (26 ± 1 lb ft) with tooling that is rotating no faster than 75 rpm. 
Angle of alignment for the bellows assembly 180 ± 3 degrees. 

Caterpillar Information System:

D11T Track-Type Tractor Hydraulic System Bypass Valve (Hydraulic Oil Cooler)
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System MID 027 - CID 0590 - FMI 02
953D Welding Tractor Safety Messages
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570} Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
D6T Track-Type Tractor Engine and Machine Warm-Up
2010/11/24 Improvement To The Hydraulic Tank Implement Return Tube Are Now Used On The D8T {5056}
D11T Track-Type Tractor Hydraulic System Dual Tilt Control Valve
C13 Engines for Caterpillar Built Machines Diesel Particulate Filter
D11T Track-Type Tractor Hydraulic System Fan Drive Motor
980K Wheel Loader Electrohydraulic System Ride Control Accumulator
980K Wheel Loader Electrohydraulic System Piston Pump (Implement)
D11T Track-Type Tractor Lubricant Viscosities - Fluids Recommendations
Installation Of Differential Steering Control Update On The D6T, D7E, And D8T Track-Type Tractors{5063, 5705} Installation Of Differential Steering Control Update On The D6T, D7E, And D8T Track-Type Tractors{5063, 5705}
C6.6 Industrial Engine Diesel Particulate Filter - Install
C6.6 Industrial Engine Diesel Particulate Filter - Remove
D11T Track-Type Tractor Hydraulic System Bulldozer Control Valve
980K Wheel Loader Electrohydraulic System Work Tool Control
953D Welding Tractor Specifications
Update to the Fuel Level Sender Assembly for the IT38H Integrated Toolcarrier and 938H Wheel Loaders{1273, 7422} Update to the Fuel Level Sender Assembly for the IT38H Integrated Toolcarrier and 938H Wheel Loaders{1273, 7422}
2010/10/29 Additional Harness Protection Has Been Added {1408, 7324}
2010/11/01 A Procedure Is Now Available to Replace Engine Starting Motor Cable and Eliminate Main Fuse {1408}
D11T Track-Type Tractor Hydraulic System Fan Drive Pump
C32 LRC Engine for Track-Type Tractors Speed Control (PWM) - Test
2011/02/28 New Power Train Software Group Is Now Used on Certain Series G Wheel Tractor-Scrapers {7610, 7620}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.