953D Welding Tractor Caterpillar


Safety Messages

Usage:

953D LBP
关于起吊设备方面的更多信息,请参阅起吊设备的操作和保养手册。

关于空气压缩机方面的更多信息,请参阅空气压缩机的操作和保养手册。

关于发电机方面的更多信息,请参阅发电机的操作和保养手册。

关于主机方面的更多信息,请参阅操作和保养手册, SEBU8123。

本机器上有一些特殊的安全标志。 这些标志是主机上标志的补充。 本章节介绍了危险的确切位置并对危险加以描述。 请熟悉所有的安全标志。

请确保所有的安全标志都清晰易读。 如果字迹模糊难读就应清洗或更换此安全标志。 当安全标志上的图示无法清晰辨识时,请更换此安全标志。 清洗安全标志时要使用布、水和肥皂。 禁止使用溶剂、汽油或其他强烈的化学药品来清洗安全标志。 这些清洁溶剂可能会使固定标志用的粘着剂失去粘性。 并进而导致安全标志从机器上脱落。

更换任何已损坏或丢失的安全标志。 如果贴有安全标志的零件需要替换,请在更换零件上贴上安全标志。 任何 Cat 代理商都可以提供新的安全标志。



图 1g02305213


图 2g02305233

不准操作(1)

此警告位于驾驶室内和发电机室面板上。



图 3g01370904

------ WARNING! ------

在阅读和理解操作和保养手册中的说明和警告之前,请勿操作此机器。 未遵守这些指示或未注意这些警告,可能会导致人身伤亡。 需要更换手册时请与 Cat 代理商联系。 用户有责任小心对待机器。


电击危险(2)

阅读并遵循电气设备的所有说明。 此警告标志位于电气设备上的多个位置处。 一个贴膜位于断路器面板上。 一个贴膜位于机器右侧的发电机面板外侧。 一个贴膜位于发电机侧面,还有一个贴膜位于仪表板上。 三个贴膜位于中间机柜内发电机的另一侧。 一个贴膜位于中间机柜内电缆上方的后壁上。



图 4g02656416

------ WARNING! ------

警告! 电击/触电危险! 请阅读和了解操作和保养手册中的指示和警告。 不按规程操作会造成人身伤亡。


确保接地电缆牢固连接到机器后部的焊机室上。

确保焊棚的金属结构通过焊车正确接地。

挤压危险(3)

此安全标志位于驾驶室内的左侧。



图 5g01382703

------ WARNING! ------

挤压危险! 一些机器的前部连杆机构组合(动臂、斗杆、快速连接器、作业机具)可能在作业期间需要保持作业机具远离驾驶室。 如果操作过程中作业机具接触驾驶室,可能会造成人身伤亡。


确保起吊设备不会接触主机的驾驶室。

Caterpillar Information System:

Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570} Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
D6T Track-Type Tractor Engine and Machine Warm-Up
2010/11/24 Improvement To The Hydraulic Tank Implement Return Tube Are Now Used On The D8T {5056}
D11T Track-Type Tractor Hydraulic System Dual Tilt Control Valve
C13 Engines for Caterpillar Built Machines Diesel Particulate Filter
D11T Track-Type Tractor Hydraulic System Fan Drive Motor
980K Wheel Loader Electrohydraulic System Ride Control Accumulator
980K Wheel Loader Electrohydraulic System Piston Pump (Implement)
D11T Track-Type Tractor Lubricant Viscosities - Fluids Recommendations
D11T Track-Type Tractor Power Train Final Drive - Assemble
C9.3 Tier 4 Final Engines Exhaust Diffuser Adapter
Replacement Procedure for STIC Control Bracket on 993K Wheel Loaders{3033} Replacement Procedure for STIC Control Bracket on 993K Wheel Loaders{3033}
621G, 623G, 627G, 631G, 637G, and 657G Wheel Tractor-Scrapers Power Train Electronic Control System MID 027 - CID 0590 - FMI 02
D11T Track-Type Tractor Hydraulic System Bypass Valve (Hydraulic Oil Cooler)
C13, C15, and C18 Tier 4 Final Engines Exhaust Lines (DPF Inlet)
Installation Of Differential Steering Control Update On The D6T, D7E, And D8T Track-Type Tractors{5063, 5705} Installation Of Differential Steering Control Update On The D6T, D7E, And D8T Track-Type Tractors{5063, 5705}
C6.6 Industrial Engine Diesel Particulate Filter - Install
C6.6 Industrial Engine Diesel Particulate Filter - Remove
D11T Track-Type Tractor Hydraulic System Bulldozer Control Valve
980K Wheel Loader Electrohydraulic System Work Tool Control
953D Welding Tractor Specifications
Update to the Fuel Level Sender Assembly for the IT38H Integrated Toolcarrier and 938H Wheel Loaders{1273, 7422} Update to the Fuel Level Sender Assembly for the IT38H Integrated Toolcarrier and 938H Wheel Loaders{1273, 7422}
2010/10/29 Additional Harness Protection Has Been Added {1408, 7324}
2010/11/01 A Procedure Is Now Available to Replace Engine Starting Motor Cable and Eliminate Main Fuse {1408}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.