Gear Pump (Steering Oil Cooler) - Disassemble
Show/hide table
| Required Tools | |||
|---|---|---|---|
| Tool | Part Number | Part Description | Qty |
| A | 1P-1861 | Retaining Ring Pliers | 1 |
Start By:
- Remove the gear pump. Refer to Disassembly and Assembly, "Gear Pump (Steering Oil Cooler) - Remove".
- Remove bolts (1) and cover (2).
Show/hide table
Illustration 2 g01122309 - Remove housing (3) and O-ring seal (4).
Show/hide table
Illustration 3 g01122310 - Remove O-ring seal (5) from housing (3).
Show/hide table
Illustration 4 g01122311 - Remove bearing (6).
Show/hide table
Illustration 5 g01122312 - Remove seal (7) and seal (8) from bearing (6).
Show/hide table
Illustration 6 g01122313 - Remove gears (9).
Show/hide table
Illustration 7 g01122314 - Remove bearing (10).
Show/hide table
Illustration 8 g01122315 - Remove seal (11) and seal (12) from bearing (10).
Show/hide table
Illustration 9 g01122316 - Use Tooling (A) in order to remove retaining ring (14).
- Remove seal (15) from flange (13).
Show/hide table
| |
| Illustration 1 | g01122308 |
Caterpillar Information System:
993K Wheel Loader Machine Systems Hydraulic Tank (Steering) (Brake) - Assemble
993K Wheel Loader Machine Systems Hydraulic Tank (Steering) (Brake) - Disassemble
613G Wheel Tractor-Scraper Chassis Electronic Control System Diagnostic Code List
613G Wheel Tractor-Scraper Power Train Transmission Pressures - Test and Adjust
Incorrect Wiring For AccuGrade On D6K And D6N Track-Type Tractors{1408, 7220} Incorrect Wiring For AccuGrade On D6K And D6N Track-Type Tractors{1408, 7220}
914G2 and IT14G2 Compact Wheel Loaders Mirror - If Equipped
Installation Instructions for the 330-0822 Control Arrangement (Variable Pitch Fan) (Kit){107P, 1356, 1386, 138R, 7332} Installation Instructions for the 330-0822 Control Arrangement (Variable Pitch Fan) (Kit){107P, 1356, 1386, 138R, 7332}
2008/09/22 The Routing of the Lines in the Power Train Oil Lines Group have been Updated {3016, 3024}
3508 EUI Engines for Caterpillar Built Machines Fuel Transfer Pump
2008/09/15 Improved Engine Side Panels Are Now Used {7267}
2008/09/22 New Pin Within A Pin Improves Retention of Planetary Shaft {4011}
3500 Generator Sets Generator Load - Check
613G Wheel Tractor-Scraper Power Train Pressure Differential Valve (Transmission) - Test
993K Wheel Loader Machine Systems Gear Pump (Steering Oil Cooler) - Assemble
993K Wheel Loader Machine Systems Piston Pump (Steering) (Center) - Disassemble
993K Wheel Loader Machine Systems Piston Pump (Steering) (Center) - Assemble
993K Wheel Loader Machine Systems Relief Valve (Steering Pilot) - Install
613G Wheel Tractor-Scraper Chassis Electronic Control System MID 087 - CID 0041 - FMI 03
613G Wheel Tractor-Scraper Chassis Electronic Control System MID 087 - CID 0041 - FMI 04
613G Wheel Tractor-Scraper Chassis Electronic Control System MID 087 - CID 0070 - FMI 03
613G Wheel Tractor-Scraper Chassis Electronic Control System MID 087 - CID 0070 - FMI 04
613G Wheel Tractor-Scraper Chassis Electronic Control System MID 087 - CID 0168 - FMI 01
613G Wheel Tractor-Scraper Chassis Electronic Control System MID 087 - CID 0191 - FMI 02
613G Wheel Tractor-Scraper Chassis Electronic Control System MID 087 - CID 0246 - FMI 09