Hydraulic Tank (Steering) (Brake) - Disassemble
Start By:
- Remove the hydraulic tank. Refer to Disassembly and Assembly, "Hydraulic Tank (Steering)(Brake) - Remove".
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Remove bolts (1) from top cover assembly (2). Remove top cover assembly (2) from the hydraulic tank.
Show/hide table
Illustration 2 g00322893 - Remove O-ring seal (3) from top cover assembly (2).
Show/hide table
Illustration 3 g00322894 - Remove bolts (4) from sight gauge (5). Remove sight gauge (5) from the hydraulic tank.
Show/hide table
Illustration 4 g00322895 - Remove O-ring seals (6) from both sides of sight gauge (5).
Show/hide table
Illustration 5 g00322899 - Remove cap (9) and setscrew (7) from sight glass (8). Remove the O-ring seals from cap (9) and from setscrew (7).
Show/hide table
Illustration 6 g00322900 - Remove bolts (10) from the hydraulic tank. Use two people in order to separate the hydraulic tank into two halves. The weight of the hydraulic tank is approximately
98 kg (216 lb) .Show/hide tableIllustration 7 g01140856 - Remove bolts (11). Remove screens (12) and (13) from the hydraulic tank.
Show/hide table
Illustration 8 g00322902 - Remove bolts (14). Remove strainer assembly (15) from the hydraulic tank.
Show/hide table
Illustration 9 g01140860 - Remove O-ring seal (16), nut (21), washer (20), washer (19), and screen (18) from strainer (17).
Show/hide table
Illustration 10 g00322947 - Remove bolts (22) from baffle assembly (23). Remove baffle assembly (23) from the hydraulic tank.
Show/hide table
Illustration 11 g01140868 - Remove O-ring seal (24), locknut (28), plate (27), and screen (26) from baffle (25).
Show/hide table
Illustration 12 g00322950 - Remove nuts (29). Remove valve assembly (30) from the hydraulic tank.
Show/hide table
Illustration 13 g00322951 - Remove guide (31), spring (32), and valve (33) from seal (34).
Show/hide table
Illustration 1 | g00322892 |
Caterpillar Information System:
613G Wheel Tractor-Scraper Chassis Electronic Control System Diagnostic Code List
613G Wheel Tractor-Scraper Power Train Transmission Pressures - Test and Adjust
Incorrect Wiring For AccuGrade On D6K And D6N Track-Type Tractors{1408, 7220} Incorrect Wiring For AccuGrade On D6K And D6N Track-Type Tractors{1408, 7220}
914G2 and IT14G2 Compact Wheel Loaders Mirror - If Equipped
Installation Instructions for the 330-0822 Control Arrangement (Variable Pitch Fan) (Kit){107P, 1356, 1386, 138R, 7332} Installation Instructions for the 330-0822 Control Arrangement (Variable Pitch Fan) (Kit){107P, 1356, 1386, 138R, 7332}
2008/09/22 The Routing of the Lines in the Power Train Oil Lines Group have been Updated {3016, 3024}
3508 EUI Engines for Caterpillar Built Machines Fuel Transfer Pump
2008/09/15 Improved Engine Side Panels Are Now Used {7267}
2008/09/22 New Pin Within A Pin Improves Retention of Planetary Shaft {4011}
3500 Generator Sets Generator Load - Check
C9 Engine and D7E Track-Type Tractors Injector Trim File - Install
2008/10/13 An Improved Track Bushing Is Now Used {4169, 4171}
993K Wheel Loader Machine Systems Hydraulic Tank (Steering) (Brake) - Assemble
993K Wheel Loader Machine Systems Gear Pump (Steering Oil Cooler) - Disassemble
613G Wheel Tractor-Scraper Power Train Pressure Differential Valve (Transmission) - Test
993K Wheel Loader Machine Systems Gear Pump (Steering Oil Cooler) - Assemble
993K Wheel Loader Machine Systems Piston Pump (Steering) (Center) - Disassemble
993K Wheel Loader Machine Systems Piston Pump (Steering) (Center) - Assemble
993K Wheel Loader Machine Systems Relief Valve (Steering Pilot) - Install
613G Wheel Tractor-Scraper Chassis Electronic Control System MID 087 - CID 0041 - FMI 03
613G Wheel Tractor-Scraper Chassis Electronic Control System MID 087 - CID 0041 - FMI 04
613G Wheel Tractor-Scraper Chassis Electronic Control System MID 087 - CID 0070 - FMI 03
613G Wheel Tractor-Scraper Chassis Electronic Control System MID 087 - CID 0070 - FMI 04
613G Wheel Tractor-Scraper Chassis Electronic Control System MID 087 - CID 0168 - FMI 01