Hydraulic Tank (Steering) (Brake) - Assemble
Show/hide table
Required Tools | |||
---|---|---|---|
Tool | Part Number | Part Description | Qty |
A | 3G-4090 | Sealant | 1 |
- Install valve (33), spring (32), and guide (31) on seal (34).
Show/hide table
Illustration 2 g00322950 - Install valve assembly (30) in the hydraulic tank. Install nuts (29).
Show/hide table
Illustration 3 g00322948 - Install screen (26), plate (27), and locknut (28) on baffle (25). Tighten locknut (28) to a torque of
20 ± 5 N·m (15 ± 4 lb ft) . - Install O-ring seal (24) on baffle (25).
Show/hide table
Illustration 4 g00322947 - Install baffle assembly (23) on the hydraulic tank. Install bolts (22).
Show/hide table
Illustration 5 g00322946 - Install screen (18), washer (19), washer (20), and nut (21) on strainer (17).
- Install O-ring seal (16) on strainer (17).
Show/hide table
Illustration 6 g00322902 - Install strainer assembly (15) on the hydraulic tank. Install bolts (14).
Show/hide table
Illustration 7 g00322901 - Install screens (12) and (13) on the hydraulic tank. Install bolts (11).
Show/hide table
Illustration 8 g01140872 - Clean the mating surfaces of the hydraulic tank and apply Tooling (A) to the mating surfaces of the hydraulic tank.
Note: Make sure that the ends of Tooling (A) overlap in a crisscross manner, as shown.
Show/hide tableIllustration 9 g00322900 - Use two people in order to join the two halves of the hydraulic tank. The weight of the hydraulic tank is
98 kg (216 lb) . Install bolts (10).Show/hide tableIllustration 10 g00322899 - Install setscrew (7) and the O-ring seal on sight glass (8). Install cap (9) and the O-ring seal on sight glass (8).
Show/hide table
Illustration 11 g00322895 - Install O-ring seals (6) on both sides of sight gauge (5).
Show/hide table
Illustration 12 g00322894 - Install sight gauge (5) on the hydraulic tank. Install bolts (4) on sight gauge (5). Tighten bolts (4) to a torque of
7 ± 1 N·m (62 ± 9 lb in) .Show/hide tableIllustration 13 g00322893 - Install O-ring seal (3) on top cover assembly (2).
Show/hide table
Illustration 14 g00322892 - Install top cover assembly (2) on the hydraulic tank. Install bolts (1) on top cover assembly (2).
Show/hide table
Illustration 1 | g00322951 |
End By:
- Install the hydraulic tank. Refer to Disassembly and Assembly, "Hydraulic Tank (Steering)(Brake) - Install".
Caterpillar Information System:
993K Wheel Loader Machine Systems Hydraulic Tank (Steering) (Brake) - Disassemble
613G Wheel Tractor-Scraper Chassis Electronic Control System Diagnostic Code List
613G Wheel Tractor-Scraper Power Train Transmission Pressures - Test and Adjust
Incorrect Wiring For AccuGrade On D6K And D6N Track-Type Tractors{1408, 7220} Incorrect Wiring For AccuGrade On D6K And D6N Track-Type Tractors{1408, 7220}
914G2 and IT14G2 Compact Wheel Loaders Mirror - If Equipped
Installation Instructions for the 330-0822 Control Arrangement (Variable Pitch Fan) (Kit){107P, 1356, 1386, 138R, 7332} Installation Instructions for the 330-0822 Control Arrangement (Variable Pitch Fan) (Kit){107P, 1356, 1386, 138R, 7332}
2008/09/22 The Routing of the Lines in the Power Train Oil Lines Group have been Updated {3016, 3024}
3508 EUI Engines for Caterpillar Built Machines Fuel Transfer Pump
2008/09/15 Improved Engine Side Panels Are Now Used {7267}
2008/09/22 New Pin Within A Pin Improves Retention of Planetary Shaft {4011}
3500 Generator Sets Generator Load - Check
C9 Engine and D7E Track-Type Tractors Injector Trim File - Install
993K Wheel Loader Machine Systems Gear Pump (Steering Oil Cooler) - Disassemble
613G Wheel Tractor-Scraper Power Train Pressure Differential Valve (Transmission) - Test
993K Wheel Loader Machine Systems Gear Pump (Steering Oil Cooler) - Assemble
993K Wheel Loader Machine Systems Piston Pump (Steering) (Center) - Disassemble
993K Wheel Loader Machine Systems Piston Pump (Steering) (Center) - Assemble
993K Wheel Loader Machine Systems Relief Valve (Steering Pilot) - Install
613G Wheel Tractor-Scraper Chassis Electronic Control System MID 087 - CID 0041 - FMI 03
613G Wheel Tractor-Scraper Chassis Electronic Control System MID 087 - CID 0041 - FMI 04
613G Wheel Tractor-Scraper Chassis Electronic Control System MID 087 - CID 0070 - FMI 03
613G Wheel Tractor-Scraper Chassis Electronic Control System MID 087 - CID 0070 - FMI 04
613G Wheel Tractor-Scraper Chassis Electronic Control System MID 087 - CID 0168 - FMI 01
613G Wheel Tractor-Scraper Chassis Electronic Control System MID 087 - CID 0191 - FMI 02