Improved Engine Side Panels Are Now Used {7267}
- Wheel Loader:
- 980H (S/N: MHG1-UP)
Description of Change: A new improved engine side panel is being used. The new side panels will improve the durability on the 980H Medium Wheel Loaders.
Adaptable To: The 251-4873 Panel and the 251-4874 Panel has been updated to a thicker section at the bolt holes. The 7X-0603 Hard Washer is being used to mount the side panels to the frame. The larger washers are being used to distribute the loading from the bolts.
Note: This problem does not affect the (S/N: A8J1-UP) and the (S/N: JMS1-UP) prefixes.
Show/hide table
Illustration 1 | g01642774 |
(A) Improved bolt holes |
This change is effective on the 980H (S/N: MHG962-UP).
This change is adaptable to 980H (S/N: MHG1-961).
Caterpillar Information System:
2008/09/22 New Pin Within A Pin Improves Retention of Planetary Shaft {4011}
3500 Generator Sets Generator Load - Check
C9 Engine and D7E Track-Type Tractors Injector Trim File - Install
2008/10/13 An Improved Track Bushing Is Now Used {4169, 4171}
3408E and 3412E Engines for Caterpillar Built Machines Flywheel Housing
TS185 and TS225 Towed Scrapers Machine Systems Ejector Clearance - Check and Adjust
TS185 and TS225 Towed Scrapers Machine Systems Service Brake (Scraper)
953D, 963D and 973D Track-Type Loaders Monitoring System Menus (Instrument Cluster)
613G Wheel Tractor-Scraper Power Train Transfer Gear End Play - Adjust
Installation of Regeneration Circuit for Tilt Cylinder for Machine with 3.6 Meter Boom{1408, 5057, 5104, 512R} Installation of Regeneration Circuit for Tilt Cylinder for Machine with 3.6 Meter Boom{1408, 5057, 5104, 512R}
C9 Engine and D7E Track-Type Tractors Electronic Service Tool Does Not Communicate
Welding Procedure for the Pitch Link Pins{6060, 6063} Welding Procedure for the Pitch Link Pins{6060, 6063}
3508 EUI Engines for Caterpillar Built Machines Fuel Transfer Pump
2008/09/22 The Routing of the Lines in the Power Train Oil Lines Group have been Updated {3016, 3024}
Installation Instructions for the 330-0822 Control Arrangement (Variable Pitch Fan) (Kit){107P, 1356, 1386, 138R, 7332} Installation Instructions for the 330-0822 Control Arrangement (Variable Pitch Fan) (Kit){107P, 1356, 1386, 138R, 7332}
914G2 and IT14G2 Compact Wheel Loaders Mirror - If Equipped
Incorrect Wiring For AccuGrade On D6K And D6N Track-Type Tractors{1408, 7220} Incorrect Wiring For AccuGrade On D6K And D6N Track-Type Tractors{1408, 7220}
613G Wheel Tractor-Scraper Power Train Transmission Pressures - Test and Adjust
613G Wheel Tractor-Scraper Chassis Electronic Control System Diagnostic Code List
993K Wheel Loader Machine Systems Hydraulic Tank (Steering) (Brake) - Disassemble
993K Wheel Loader Machine Systems Hydraulic Tank (Steering) (Brake) - Assemble
993K Wheel Loader Machine Systems Gear Pump (Steering Oil Cooler) - Disassemble
613G Wheel Tractor-Scraper Power Train Pressure Differential Valve (Transmission) - Test
993K Wheel Loader Machine Systems Gear Pump (Steering Oil Cooler) - Assemble