Oil Pan and Gasket{1302, 1302} Caterpillar

Industrial Engine:

3056E (S/N: 3561-UP)

3056 (S/N: 7AK1-UP; 1ML1-UP; 7MS1-UP)

Excavator:

M316C (S/N: BDX1-UP)

M318C (S/N: BCZ1-UP)

M322C (S/N: BDK1-UP; BDY1-UP)

Integrated Toolcarrier:

IT28G (S/N: WAC1-UP; DBT1-UP)

Paving Compactor:

CP-563E (S/N: CNT1-UP)

CP-663E (S/N: AFL1-UP)

CS-563E (S/N: ASA1-UP; CNG1-UP)

CS-663E (S/N: AEF1-UP; DAG1-UP)

CS-683E (S/N: DAD1-UP)

Wheel Loader:

924G (S/N: AAN1-UP; 9SW1-UP; 3PZ1-UP)

928G (S/N: DJD1-UP; WLG1-UP)

930G (S/N: TWR1-UP)

Introduction

Porosity or cracks of oil pan.

Problem

There are reports of porosity or cracks in 113-5280 Oil Pan and oil leakage through the oil pan at low hours. Additional problems on 6I-4710 Gasket have been identified as a leaking engine oil.

Solution

An investigation is on going. Use same parts.

Note: Caterpillar dealers are required to provide photographic evidence of the example when this issue has been seen. Caterpillar dealers are required to supply pictures or documentation that highlights the leak path or locations of defects of the material in the components under investigation.

Caterpillar dealers from Europe, Africa and the Middle East (EAME) should send the information to the following address.

Caterpillar dealers from the Asia Pacific Division (APD) should send the information to the following address.

Caterpillar dealers from the North America Commercial Division (NACD) should send the information to the following address.

Part should be returned for analysis. The Caterpillar dealers are requested to return parts. Ensure that a service claim form is attached to all returned parts. Oil pans and gaskets from NACD and LACD should be packaged. Oil pans and gaskets should be shipped to the following address.

The oil pans and the gaskets from EAME and APD territories should be packaged. The oil pans and the gaskets should be shipped to Perkins Engines Limited.