Transmission Warm-up
使机油逐渐预热的情况下,轴承部件能保持最佳的工作状态。 冷起动时高速可能缩短轴承部件的耐久性。 在预热过程中,变速箱上的电子控制系统在一定的冷油温度范围会限制可用的变速箱档位。 如果温度低于 −23
°C (−10 °F),使发动机预热大约 20 分钟。
变速箱机油加热器
如果环境温度为 -23° C(-10° F),变速箱用户或操作员可以选择安装变速箱机油加热器。 加热器有助于在低温条件下起动车辆,并降低车辆进入工作状态所需的预热时间。 CX31 在变矩器壳体下方有一个 SAE J1926 #16 直螺纹 "O"形圈集油槽加热器端口。 一般而言,供应商会建议每夸脱集油槽机油使用 8 到 10 瓦加热功率。 市售加热器(带或不带节温器)有与 CX31变速箱兼容的 150、300 和 500 瓦容量可供选择。
Caterpillar Information System:
CX31 On-Highway Transmission Transmission Control
3126B and 3126E Truck Engines Electronic Control Wiring Group
Check Engine Light ON with No Active Fault Codes for 3126E Engines{1901, 1902, 7431, 7620} Check Engine Light ON with No Active Fault Codes for 3126E Engines{1901, 1902, 7431, 7620}
C6.6 Engines for Caterpillar Built Machines Engine Oil Pan
C7 Marine Engines Auxiliary Water Pump - Disassemble
2006/01/23 Installation of a Jacket Water Heater Reduces the Formation of Condensation {1383}
C6.6 Generator Set Indicator Lamps
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Sensors and Electrical Connectors
2006/01/23 Changes to Specifications "Piston and Rings" {1214, 1215}
C6.6 Engines for Caterpillar Built Machines Fuel Injection Pump
G3500 A3 Engines Self-Diagnostics
C6.6 Engines for Caterpillar Built Machines Glow Plugs
CX31 On-Highway Transmission Transmission Oil - Change
CX31 On-Highway Transmission Transmission Oil Level - Check
CX31 On-Highway Transmission Transmission Oil Sample - Obtain
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission Shifting Function
2010/09/01 Cylinder Pack Upgrade Is Available for Certain 3406B and 3406C Engines When Replacing All Six Cylinders Packs {1201, 1225}
Oil Pan and Gasket{1302, 1302} Oil Pan and Gasket{1302, 1302}
C15 and C18 Generator Set Engines Turbocharger - Disassemble
C15 and C18 Generator Set Engines Turbocharger - Assemble
C15 and C18 Generator Set Engines Exhaust Manifold - Remove and Install
C3.3 Industrial Engine Air in Fuel - Test
C3.3 Industrial Engine Fuel Injector - Remove
Procedure for Testing the 167-1709 Pressure Sensor Gp on the 3126 Industrial Engine{1718, 1916, 1917, 1923, 1924, 1925} Procedure for Testing the 167-1709 Pressure Sensor Gp on the 3126 Industrial Engine{1718, 1916, 1917, 1923, 1924, 1925}