Electronic Control Wiring Group
Show/hide table
 | |
| Illustration 1 | g01237194 |
Typical example | |
(1) Tighten the nut to the following torque. ... 6 ± 1 N·m (55 ± 9 lb in)
Caterpillar Information System:
Check Engine Light ON with No Active Fault Codes for 3126E Engines{1901, 1902, 7431, 7620} Check Engine Light ON with No Active Fault Codes for 3126E Engines{1901, 1902, 7431, 7620}
C6.6 Engines for Caterpillar Built Machines Engine Oil Pan
C7 Marine Engines Auxiliary Water Pump - Disassemble
2006/01/23 Installation of a Jacket Water Heater Reduces the Formation of Condensation {1383}
C6.6 Generator Set Indicator Lamps
C4.4 and C6.6 Industrial Engines and Engines for Caterpillar Built Machines Sensors and Electrical Connectors
2006/01/23 Changes to Specifications "Piston and Rings" {1214, 1215}
C6.6 Engines for Caterpillar Built Machines Fuel Injection Pump
G3500 A3 Engines Self-Diagnostics
C6.6 Engines for Caterpillar Built Machines Glow Plugs
2006/03/20 A New Exhaust Gasket is Now Available {1059}
3126B and 3126E Truck Engines Inlet Air Temperature Sensor
CX31 On-Highway Transmission Transmission Control
CX31 On-Highway Transmission Transmission Warm-up
CX31 On-Highway Transmission Transmission Oil - Change
CX31 On-Highway Transmission Transmission Oil Level - Check
CX31 On-Highway Transmission Transmission Oil Sample - Obtain
CX28, CX31 and CX35 On-Highway Transmissions Power Train Electronic Control System Transmission Shifting Function
2010/09/01 Cylinder Pack Upgrade Is Available for Certain 3406B and 3406C Engines When Replacing All Six Cylinders Packs {1201, 1225}
Oil Pan and Gasket{1302, 1302} Oil Pan and Gasket{1302, 1302}
C15 and C18 Generator Set Engines Turbocharger - Disassemble
C15 and C18 Generator Set Engines Turbocharger - Assemble
C15 and C18 Generator Set Engines Exhaust Manifold - Remove and Install
C3.3 Industrial Engine Air in Fuel - Test