2006/12/18 Caterpillar


Updates For Compatibility With the Latest Version Of Power Train Software and Engine Monitoring Software (EMS) {7620}

Usage:

D6R III DLM
Track-Type Tractor:
D6RSeries III (S/N: GJB1-UP; WCB1-UP; HDC1-UP; HKE1-UP; WRG1-UP; JDL1-UP; GMT1-UP; MRT1-UP; RFC1-UP; TBC1-UP; HCD1-UP; MTJ1-UP; DMK1-UP; DLM1-UP; LFM1-UP; DPS1-UP)
Service Magazine SEPD0858, 09 October 2006, "Updates For Compatibility With the Latest Version Of Power Train Software". Disregard This article. See the replacement article that follows.

Reference Refer to Special Instructions, REHS3307, "Procedures For updating D6R Series III For Compatibility With the Latest Version Of Power Train Software and Engine Monitoring Software (EMS)" for the installation procedures for updating your D6R Series III to be compatible with 304-1764 Power Train Software, the latest version of power train software, EMS 292-9668 Monitor Software, or the latest version of monitor software.

Description of Change: Updated power train software and engine monitoring software (EMS) is now available for the D6R Series III.

Adaptable To: When flashing 304-1764 Power Train Software or the latest version of power train software fault codes may appear. If your D6R Series III has fault codes follow Special Instructions, REHS3307, "Procedures For Updating D6R Series III For Compatibility With the Latest Version Of Power Train Software and Engine Monitoring Software (EMS)". This will allow the machines to be compatible with the latest version of power train software and engine monitoring software (EMS).

The machines that are listed below have the updated parts in order to be compatible with the latest version of software:

  • (S/N: GJB372-UP)

  • (S/N: WCB133-UP)

  • (S/N: HCD145-UP)

  • (S/N: HKE171-UP)

  • (S/N: WRG308-UP)

  • (S/N: JDL127-UP)

  • (S/N: GMT118-UP)

  • (S/N: MRT240-UP)

  • (S/N: HDC170-UP)

  • (S/N: TBC152-UP)

  • (S/N: LFM139-UP)

  • (S/N: DPS124-UP)

  • (S/N: DMK163-UP)

  • (S/N: RFC143-UP)

  • (S/N: MTJ152-UP)

  • (S/N: DLM161-UP)

  • (S/N: JEK1-UP)

  • (S/N: EXL1-UP)

  • (S/N: EXW1-UP)

  • (S/N: LGP1-UP)

The machines that are listed below are adaptable to the updated parts in order to be compatible with the latest version of software:

  • (S/N: GJB1-371)

  • (S/N: WCB1-132)

  • (S/N: HCD1-144)

  • (S/N: HKE1-170)

  • (S/N: WRG1-307)

  • (S/N: JDL1-126)

  • (S/N: GMT1-117)

  • (S/N: MRT1-239)

  • (S/N: TBC1-151)

  • (S/N: LFM1-138)

  • (S/N: DPS1-123)

  • (S/N: DMK1-162)

  • (S/N: RFC1-140)

  • (S/N: MTJ1-151)

  • (S/N: DLM1-160)

  • (S/N: HDC1-169)

Caterpillar Information System:

2006/10/23 Improvements to Tilt Cylinder Lines {5057, 5104}
Filtration Procedure for Wheel Tractor-Scraper Hydraulic Oil {0680, 0768, 5050, 5056} Filtration Procedure for Wheel Tractor-Scraper Hydraulic Oil {0680, 0768, 5050, 5056}
D6G Series II Track-Type Tractor Engine Supplement Engine and Torque Converter - Remove
993K Wheel Loader Oil Renewal System Oil - Add - If Equipped
993K Wheel Loader Hydraulic Tank Breaker Relief Valve (Implement) (Hydraulic Fan) - Clean
993K Wheel Loader Hydraulic System Oil Sample (Implement) (Hydraulic Fan) - Obtain
993K Wheel Loader Hydraulic System Oil Level (Implement) (Hydraulic Fan) - Check
993K Wheel Loader Hydraulic System Oil Filter (Steering Oil Cooler) (Steering Pilot) - Replace
993K Wheel Loader Hydraulic System Oil Filter (Implement Pilot) - Replace - Axle Oil Cooler
993K Wheel Loader Hydraulic System Oil (Implement) (Hydraulic Fan) - Change
Procedures For Updating D6R Series III For Compatibility With the latest Version Of Power Train Software and Electronic Monitoring System III (EMS){7620} Procedures For Updating D6R Series III For Compatibility With the latest Version Of Power Train Software and Electronic Monitoring System III (EMS){7620}
993K Wheel Loader Hydraulic Oil Tank Filter Elements (Case Drain) (Implement) (Hydraulic Fan) - Replace
D6G Series II Track-Type Tractor Engine Supplement Radiator Guard and Radiator - Remove
D6K Track-Type Tractor Hydraulic System Bulldozer Blade
D6K Track-Type Tractor Hydraulic System Cutting Edges and End Bits
D6G Series II Track-Type Tractor Machine Systems Fuel Tank - Remove and Install
657G Wheel Tractor-Scraper Machine Systems Load Cylinder - Remove and Install
Bench Test Procedure for a D4E Track-Type Tractor Transmission{3030, 3073} Bench Test Procedure for a D4E Track-Type Tractor Transmission{3030, 3073}
D6K Track-Type Tractor Hydraulic System Control Valve (Ripper)
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer General Information
D6K Track-Type Tractor Hydraulic System Control Valve (Bulldozer Tilt)
D6K Track-Type Tractor Hydraulic System Control Valve (Bulldozer Lift)
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Service Tools
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Connector Locations
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.