1. Home
  2. Caterpillar
  3. Operation and Maintenance Manual
  4. #i02594992

993K Wheel Loader Caterpillar


Hydraulic System Oil Level (Implement) (Hydraulic Fan) - Check

Usage:

993K Z9K
Show/hide table
Illustration 1g01290372

  • The sight gauge is located on the hydraulic tank on the left side of the machine.
    Show/hide table
    Illustration 2g01237715

  • Park the machine on level ground. Lower the work tool to the ground and apply slight downward pressure. Engage the parking brake and stop the engine.

  • Check the oil level while the engine is stopped. Maintain the oil level within the green area (A) on the sight gauge.
    Show/hide table
    Illustration 3g01237676

  • If necessary, add oil to the hydraulic tank. Open the access door on the top of the engine compartment.
    Show/hide table
    Illustration 4g01237678

  • Push the button on top of the breaker relief valve (1) in order to relieve any tank pressure. Remove the filler cap (2) and add the oil.

  • Install the filler cap and close the access door.

    • Caterpillar Information System:

    993K Wheel Loader Hydraulic System Oil Filter (Steering Oil Cooler) (Steering Pilot) - Replace
    993K Wheel Loader Hydraulic System Oil Filter (Implement Pilot) - Replace - Axle Oil Cooler
    993K Wheel Loader Hydraulic System Oil (Implement) (Hydraulic Fan) - Change
    Procedures For Updating D6R Series III For Compatibility With the latest Version Of Power Train Software and Electronic Monitoring System III (EMS){7620} Procedures For Updating D6R Series III For Compatibility With the latest Version Of Power Train Software and Electronic Monitoring System III (EMS){7620}
    993K Wheel Loader Hydraulic Oil Tank Filter Elements (Case Drain) (Implement) (Hydraulic Fan) - Replace
    992K Wheel Loader Bucket Tips - Inspect/Replace
    D7G2 Track-Type Tractor Hydraulic System Quick-Drop Valve
    D7G2 Track-Type Tractor Hydraulic System Location of Components (Implement System)
    D7G2 Track-Type Tractor Hydraulic System Hydraulic Tank
    D7G2 Track-Type Tractor Hydraulic System Bulldozer Lift Cylinder
    D7G and D7G Series II Track-Type Tractors Machine Systems Decelerator and Brake Control - Remove and Install
    AD55B Underground Articulated Truck Machine Electrical System Accessories
    993K Wheel Loader Hydraulic System Oil Sample (Implement) (Hydraulic Fan) - Obtain
    993K Wheel Loader Hydraulic Tank Breaker Relief Valve (Implement) (Hydraulic Fan) - Clean
    993K Wheel Loader Oil Renewal System Oil - Add - If Equipped
    D6G Series II Track-Type Tractor Engine Supplement Engine and Torque Converter - Remove
    Filtration Procedure for Wheel Tractor-Scraper Hydraulic Oil {0680, 0768, 5050, 5056} Filtration Procedure for Wheel Tractor-Scraper Hydraulic Oil {0680, 0768, 5050, 5056}
    2006/10/23 Improvements to Tilt Cylinder Lines {5057, 5104}
    2006/12/18 Updates For Compatibility With the Latest Version Of Power Train Software and Engine Monitoring Software (EMS) {7620}
    D6G Series II Track-Type Tractor Engine Supplement Radiator Guard and Radiator - Remove
    D6K Track-Type Tractor Hydraulic System Bulldozer Blade
    D6K Track-Type Tractor Hydraulic System Cutting Edges and End Bits
    D6G Series II Track-Type Tractor Machine Systems Fuel Tank - Remove and Install
    657G Wheel Tractor-Scraper Machine Systems Load Cylinder - Remove and Install
    Back to top
    Contacts My AVS
    The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
    CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.