Radiator Guard and Radiator - Remove
拆卸步骤
开始:
- 拆卸发动机罩。 请参阅解体与组装, "发动机罩 - 拆卸和安装"。
- 拆卸前下方防护罩。 请参阅解体与组装, "底部防护罩 - 拆卸和安装"。
注: 在所有线路、软管、导线及管子组件上作出识别标记,以便于安装。 插接好所有线路、软管和管路。 这将有助于防止液体泄漏和有助于防止污染物进入系统。
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 将发动机冷却液排入合适的容器以便保存或废弃这些冷却液。 请参阅操作和保养手册, "冷却系统冷却液 (ELC) - 更换"。
- 拆下将弯头 (1) 连到散热器的螺栓 (2) 。
Show/hide table
图 1 | g01298885 |
- 拆卸夹子 (3) 。 拆卸夹子 (4) ,将电缆组件放到旁边。
Show/hide table
图 2 | g01298891 |
- 拆卸螺栓 (5) 和卡箍 (6) 。 将软管组件 (7) 放到旁边。
Show/hide table
图 3 | g01298888 |
- 拆卸夹子 (8) 。 将蓄电池电缆组件 (9) 放到旁边。
Show/hide table
图 4 | g01298892 |
- 关闭格栅 (11) 。 安装螺栓 (10) ,以便紧固格栅 (11) 。
Show/hide table
图 5 | g01298893 |
- 拆卸螺栓 (12) 和 (13) 。 拆卸右侧面板 (14) 。
Show/hide table
图 6 | g01299284 |
- 断开线束组件 (15) 。 切断电缆带 (16) ,将线束组件 (15) 放到旁边。
Show/hide table
图 7 | g01298889 |
- 拆卸螺栓 (18) 和 (19) 。 拆卸左侧面板 (17) 。
Show/hide table
图 8 | g01299286 |
- 断开软管组件 (20) 和 (21) 。
Show/hide table
图 9 | g01298896 |
- 松开卡箍 (22) ,然后断开软管 (23) 。
Show/hide table
图 10 | g01299170 |
- 拆卸螺栓 (24) 和 (25) 。 拆卸风扇护罩 (26) 。 对另一侧风扇护罩重复进行。
Show/hide table
图 11 | g01298887 |
- 拆卸螺栓 (28) ,从铲刀上断开提升油缸 (27) 。 拆卸原有的垫片。 对另一侧重复进行。
Show/hide table
图 12 | g01298899 |
- 如图所示,紧固提升油缸 (27) 。 对另一侧提升油缸重复进行。
Show/hide table
图 13 | g01299232 |
- 将工具 (A) 和适当起吊设备连在散热器防护罩和散热器 (29) 上。 散热器防护罩和散热器 (29) 的重量约为 907 kg (2000 lb)。
Show/hide table
图 14 | g01299233 |
- 拆卸支撑散热器防护罩和散热器 (9) 的螺栓 (30) 。 对另一侧重复进行。 拆卸散热器防护罩和散热器 (29) 。
Show/hide table
图 15 | g01299234 |
Show/hide table
图 16 | g01299236 |
Caterpillar Information System:
2006/12/18 Updates For Compatibility With the Latest Version Of Power Train Software and Engine Monitoring Software (EMS) {7620}
2006/10/23 Improvements to Tilt Cylinder Lines {5057, 5104}
Filtration Procedure for Wheel Tractor-Scraper Hydraulic Oil {0680, 0768, 5050, 5056} Filtration Procedure for Wheel Tractor-Scraper Hydraulic Oil {0680, 0768, 5050, 5056}
D6G Series II Track-Type Tractor Engine Supplement Engine and Torque Converter - Remove
993K Wheel Loader Oil Renewal System Oil - Add - If Equipped
993K Wheel Loader Hydraulic Tank Breaker Relief Valve (Implement) (Hydraulic Fan) - Clean
993K Wheel Loader Hydraulic System Oil Sample (Implement) (Hydraulic Fan) - Obtain
993K Wheel Loader Hydraulic System Oil Level (Implement) (Hydraulic Fan) - Check
993K Wheel Loader Hydraulic System Oil Filter (Steering Oil Cooler) (Steering Pilot) - Replace
993K Wheel Loader Hydraulic System Oil Filter (Implement Pilot) - Replace - Axle Oil Cooler
993K Wheel Loader Hydraulic System Oil (Implement) (Hydraulic Fan) - Change
Procedures For Updating D6R Series III For Compatibility With the latest Version Of Power Train Software and Electronic Monitoring System III (EMS){7620} Procedures For Updating D6R Series III For Compatibility With the latest Version Of Power Train Software and Electronic Monitoring System III (EMS){7620}
D6K Track-Type Tractor Hydraulic System Bulldozer Blade
D6K Track-Type Tractor Hydraulic System Cutting Edges and End Bits
D6G Series II Track-Type Tractor Machine Systems Fuel Tank - Remove and Install
657G Wheel Tractor-Scraper Machine Systems Load Cylinder - Remove and Install
Bench Test Procedure for a D4E Track-Type Tractor Transmission{3030, 3073} Bench Test Procedure for a D4E Track-Type Tractor Transmission{3030, 3073}
D6K Track-Type Tractor Hydraulic System Control Valve (Ripper)
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer General Information
D6K Track-Type Tractor Hydraulic System Control Valve (Bulldozer Tilt)
D6K Track-Type Tractor Hydraulic System Control Valve (Bulldozer Lift)
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Service Tools
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Connector Locations
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Diagnostic Code List