Engine and Torque Converter - Remove
拆卸步骤
Show/hide table
需要的工具     | |||
工具     | 零件号     | 零件名称     | 数量     |
A     | 1U-9200     | 杠杆式拔拉起重机     | 1     |
B     | 189-0410     | 钩环组件     | 2     |
C     | 138-7573     | 连接支架     | 2     |
开始:
- 取下挡泥板。 请参阅解体与组装, "挡泥板 - 拆卸"。
- 拆卸前下方防护罩。 请参阅解体和组装, "底部防护装置 - 拆卸"。
注: 在所有线路、软管、导线及管子组件上作出识别标记,以便于安装。 插接好所有线路、软管和管路。 这将有助于防止液体泄漏和有助于防止污染物进入系统。
- 将液压油排入合适的容器以便保存或废弃这些液压油。 请参阅操作和保养手册, "液压系统油 - 更换"。
- 松开卡箍 (1) 。 拆卸螺栓 (3) 并拆下弯头 (2) 。
Show/hide table
图 1 | g01297518 |
Show/hide table
图 2 | g01297543 |
- 拆卸卡箍 (4) 。
Show/hide table
图 3 | g01297520 |
- 拆卸螺栓 (5) 。 拆卸螺母 (6) 和防护罩 (7) 。 对另一侧防护罩重复进行。
Show/hide table
图 4 | g01298833 |
- 在风扇 (9) 和散热器之间放置一块纸板。 拆卸螺栓 (8) 和盖 (9) 。 将风扇 (9) 放到散热器旁边。
Show/hide table
图 5 | g01297523 |
- 拆卸支架 (10) 。
Show/hide table
图 6 | g01298810 |
- 断开软管组件 (11) 和 (12) 。 将软管组件 (11) 和 (12) 放到一旁。
Show/hide table
图 7 | g01298807 |
- 拆卸螺栓 (14) 和夹子 (13) 。 拆卸螺栓 (15) 和夹子 (16) 。
Show/hide table
图 8 | g01298811 |
Show/hide table
图 9 | g01298831 |
- 从空气滤清器组件 (19) 上断开软管 (17) 。 拆卸螺栓 (18) 和空气滤清器组件 (19) 。
Show/hide table
图 10 | g01300506 |
Show/hide table
图 11 | g01300507 |
- 断开软管组件 (20) 和 (21) 。
Show/hide table
图 12 | g01298809 |
- 断开夹子 (22) 。 断开卡箍 (23) 。
Show/hide table
图 13 | g01298812 |
- 断开电缆组件 (24) 、 (25) 和 (26) 。
Show/hide table
图 14 | g01298813 |
- 拆卸盖 (28) ,断开线束组件 (27) 。
Show/hide table
图 15 | g01298815 |
- 切断电缆带 (29) 、 (30) 、 (31) 和 (32) 。
Show/hide table
图 16 | g01298816 |
- 切断电缆带 (35) 。 断开线束组件 (33) 、 (34) 、 (36) 和 (37) 。
Show/hide table
图 17 | g01298825 |
- 切断电缆带 (40) 。 拆卸卡箍 (41) 。 拆卸螺栓 (38) 和 (42) 。 拆卸板 (39) 。
Show/hide table
图 18 | g01298820 |
Show/hide table
图 19 | g01298821 |
- 从变矩器后部断开软管组件 (43) 和 (44) 。 断开软管组件 (45) 。
Show/hide table
图 20 | g01298829 |
- 松开卡箍 (48) 。 拆卸卡箍 (46) 。 对另一侧重复进行。 拆卸管组件 (47) 。 从机具泵上断开管组件 (50) 。 将管 (50) 和软管 (49) 放到旁边。
Show/hide table
图 21 | g01300208 |
Show/hide table
图 22 | g01300498 |
- 拆卸管组件 (51) 。 拆卸螺栓 (52) 和 (54) 。 拆卸驱动轴 (53) 。
Show/hide table
图 23 | g01300209 |
- 从燃油箱底部拆下连杆 (55) 。 对另一侧重复进行。
Show/hide table
图 24 | g01300251 |
- 松开卡箍 (59) 。 拆卸螺栓 (57) 。 将弯头 (56) 和软管 (58) 作为一个整体拆下。
Show/hide table
图 25 | g01300254 |
- 拆卸变速箱机油泵 (60) 。
Show/hide table
图 26 | g01300261 |
- 拆卸螺栓 (61) 。
Show/hide table
图 27 | g01300259 |
- 拆卸螺栓 (63) 和板 (62) 。
Show/hide table
图 28 | g01300270 |
- 断开线束组件 (64) 和 (65) 。
Show/hide table
图 29 | g01300253 |
- 断开线束组件 (67) 。 松开卡箍 (66) ,以便从水泵底部分离软管 (68) 。
Show/hide table
图 30 | g01300272 |
- 拆卸所有的电缆带 (70) 。 拆卸卡箍 (69) 。
Show/hide table
图 31 | g01300211 |
- 拆卸夹子 (71) 。
Show/hide table
图 32 | g01300216 |
- 断开软管组件 (72) 。
Show/hide table
图 33 | g01300217 |
- 将工具 (A) 、工具 (B) 和工具 (C) 及适当起吊设备连在发动机 (73) 和变矩器上。 发动机和变矩器 (73) 的总重量约为 1360 kg (3000 lb)。
Show/hide table
图 34 | g01300277 |
- 拆卸螺栓 (75) 和 (76) 。 从后发动机支架上拆下盖 (74) 和 (77) 。 对另一侧重复进行。
Show/hide table
图 35 | g01300273 |
- 从前发动机支架上拆下螺栓 (78) 。 对另一侧重复进行。
Show/hide table
图 36 | g01300278 |
- 拆卸发动机 (73) 和变矩器。
Show/hide table
图 37 | g01300540 |
Caterpillar Information System:
993K Wheel Loader Oil Renewal System Oil - Add - If Equipped
993K Wheel Loader Hydraulic Tank Breaker Relief Valve (Implement) (Hydraulic Fan) - Clean
993K Wheel Loader Hydraulic System Oil Sample (Implement) (Hydraulic Fan) - Obtain
993K Wheel Loader Hydraulic System Oil Level (Implement) (Hydraulic Fan) - Check
993K Wheel Loader Hydraulic System Oil Filter (Steering Oil Cooler) (Steering Pilot) - Replace
993K Wheel Loader Hydraulic System Oil Filter (Implement Pilot) - Replace - Axle Oil Cooler
993K Wheel Loader Hydraulic System Oil (Implement) (Hydraulic Fan) - Change
Procedures For Updating D6R Series III For Compatibility With the latest Version Of Power Train Software and Electronic Monitoring System III (EMS){7620} Procedures For Updating D6R Series III For Compatibility With the latest Version Of Power Train Software and Electronic Monitoring System III (EMS){7620}
993K Wheel Loader Hydraulic Oil Tank Filter Elements (Case Drain) (Implement) (Hydraulic Fan) - Replace
992K Wheel Loader Bucket Tips - Inspect/Replace
D7G2 Track-Type Tractor Hydraulic System Quick-Drop Valve
D7G2 Track-Type Tractor Hydraulic System Location of Components (Implement System)
Filtration Procedure for Wheel Tractor-Scraper Hydraulic Oil {0680, 0768, 5050, 5056} Filtration Procedure for Wheel Tractor-Scraper Hydraulic Oil {0680, 0768, 5050, 5056}
2006/10/23 Improvements to Tilt Cylinder Lines {5057, 5104}
2006/12/18 Updates For Compatibility With the Latest Version Of Power Train Software and Engine Monitoring Software (EMS) {7620}
D6G Series II Track-Type Tractor Engine Supplement Radiator Guard and Radiator - Remove
D6K Track-Type Tractor Hydraulic System Bulldozer Blade
D6K Track-Type Tractor Hydraulic System Cutting Edges and End Bits
D6G Series II Track-Type Tractor Machine Systems Fuel Tank - Remove and Install
657G Wheel Tractor-Scraper Machine Systems Load Cylinder - Remove and Install
Bench Test Procedure for a D4E Track-Type Tractor Transmission{3030, 3073} Bench Test Procedure for a D4E Track-Type Tractor Transmission{3030, 3073}
D6K Track-Type Tractor Hydraulic System Control Valve (Ripper)
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer General Information
D6K Track-Type Tractor Hydraulic System Control Valve (Bulldozer Tilt)