Fuel Tank - Remove and Install
拆卸步骤
Show/hide table
需要的工具     | |||
工具     | 零件号     | 零件名称     | 数量     |
A     | 138-7573     | 连接支架     | 2     |
注: 在所有线路、软管、导线及管子组件上作出识别标记,以便于安装。 插接好所有线路、软管和管路。 这将有助于防止液体泄漏和有助于防止污染物进入系统。
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修发动机时,请小心确保盛接流出的液体。 在打开或拆解任何储有液体的部件之前,要准备好合适的容器收集液体。 有关适合收集和盛接卡特彼勒产品上的液体的工具和供应品,请参阅专门出版物, NENG2500, "卡特彼勒代理商工具目录"。 按照本地法规和条例处置所有液体。 |
- 将燃油排入合适的容器以便保存或废弃这些燃油。 请参阅操作和保养手册, "燃油箱中的水和沉淀物 - 排放"。
- 拆卸螺栓 (1) 和盖 (2) 。
Show/hide table
图 1 | g01298948 |
- 切断将线束组件 (4) 固定至燃油箱左侧的所有电缆带 (3) 。
Show/hide table
图 2 | g01298949 |
- 拆卸螺栓 (5) 和盖 (6) 。
Show/hide table
图 3 | g01298950 |
- 断开来自燃油箱右侧的线束组件 (7) 。
Show/hide table
图 4 | g01298951 |
- 拆卸螺栓 (8) 和盖 (9) 。
Show/hide table
图 5 | g01298953 |
- 断开软管 (10) 和 (11) 。
Show/hide table
图 6 | g01298954 |
- 将工具 (A) 和适当起吊设备连在燃油箱 (12) 上。 燃油箱 (12) 的重量约为 181 kg (400 lb)。 从燃油箱 (12) 的两侧拆卸螺栓 (13) 。 拆卸燃油箱 (12) 。
Show/hide table
图 7 | g01298955 |
Show/hide table
图 8 | g01298979 |
Show/hide table
图 9 | g01298980 |
安装步骤
Show/hide table
需要的工具     | |||
工具     | 零件号     | 零件名称     | 数量     |
A     | 138-7573     | 连接支架     | 2     |
- 将工具 (A) 和适当起吊设备连在燃油箱 (12) 上。 燃油箱 (12) 的重量约为 181 kg (400 lb)。 安装燃油箱 (12) 。 将螺栓 (13) 安装至燃油箱 (12) 的两侧。
Show/hide table
图 10 | g01298980 |
Show/hide table
图 11 | g01298955 |
Show/hide table
图 12 | g01298979 |
- 连接软管 (10) 和 (11) 。
Show/hide table
图 13 | g01298954 |
- 安装盖 (9) 和螺栓 (8) 。
Show/hide table
图 14 | g01298953 |
- 将线束组件 (7) 连接至燃油箱右侧。
Show/hide table
图 15 | g01298951 |
- 安装盖 (6) 和螺栓 (5) 。
Show/hide table
图 16 | g01298950 |
- 安装将线束组件 (4) 固定至燃油箱左侧的电缆带 (3) 。
Show/hide table
图 17 | g01298949 |
- 安装盖 (2) 和螺栓 (1) 。
Show/hide table
图 18 | g01298948 |
Caterpillar Information System:
D6K Track-Type Tractor Hydraulic System Cutting Edges and End Bits
D6K Track-Type Tractor Hydraulic System Bulldozer Blade
D6G Series II Track-Type Tractor Engine Supplement Radiator Guard and Radiator - Remove
2006/12/18 Updates For Compatibility With the Latest Version Of Power Train Software and Engine Monitoring Software (EMS) {7620}
2006/10/23 Improvements to Tilt Cylinder Lines {5057, 5104}
Filtration Procedure for Wheel Tractor-Scraper Hydraulic Oil {0680, 0768, 5050, 5056} Filtration Procedure for Wheel Tractor-Scraper Hydraulic Oil {0680, 0768, 5050, 5056}
D6G Series II Track-Type Tractor Engine Supplement Engine and Torque Converter - Remove
993K Wheel Loader Oil Renewal System Oil - Add - If Equipped
993K Wheel Loader Hydraulic Tank Breaker Relief Valve (Implement) (Hydraulic Fan) - Clean
993K Wheel Loader Hydraulic System Oil Sample (Implement) (Hydraulic Fan) - Obtain
993K Wheel Loader Hydraulic System Oil Level (Implement) (Hydraulic Fan) - Check
993K Wheel Loader Hydraulic System Oil Filter (Steering Oil Cooler) (Steering Pilot) - Replace
657G Wheel Tractor-Scraper Machine Systems Load Cylinder - Remove and Install
Bench Test Procedure for a D4E Track-Type Tractor Transmission{3030, 3073} Bench Test Procedure for a D4E Track-Type Tractor Transmission{3030, 3073}
D6K Track-Type Tractor Hydraulic System Control Valve (Ripper)
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer General Information
D6K Track-Type Tractor Hydraulic System Control Valve (Bulldozer Tilt)
D6K Track-Type Tractor Hydraulic System Control Valve (Bulldozer Lift)
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Service Tools
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Connector Locations
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Diagnostic Code List
D6K Track-Type Tractor Hydraulic System Control Valve (Implement)
D6K Track-Type Tractor Backup Alarm
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer Using Caterpillar Monitoring System to Determine Diagnostic Codes