 | |
| Illustration 1 | g01341129 |
Power Train Electronic Control Module (ECM) | |
The diagnostic service tool connector and the connector for the 4C-8195 Control Service Tool are located behind the access cover in the right rear panel of the cab.
The power train electronic control module is located in the right operator platform. The electronic control module may be accessed by removing the cover plate on the operator platform.
The Electrical System Schematic, Parts Manual, and Operation and Maintenance Manual for the machine that is being serviced should be used to locate electrical components and connectors.
ReferenceFor more information on the operation of the electrical components of the machine, refer to the Systems Operation section of this manual.
ReferenceFor more information on the electrical system and the components, refer to the Service Manual module Schematic.