Oil Renewal System Oil - Add - If Equipped
Park the machine on level ground. Lower the attachment to the ground. Engage the parking brake and turn off the engine.
Note: There are two methods for adding oil to the ORS.
Show/hide table
Illustration 1 | g01298799 |
In order to fill the ORS manually, add oil through the filler tube (1) until the sight gauge (2) indicates that the ORS is "FULL".
Show/hide table
Illustration 2 | g01298806 |
In order to fill the ORS, attach a 126-7539 Nozzle to the male coupling (3). Fill the ORS until the sight gauge indicates that the ORS is "FULL".
Note: You may also use the "FULL" indicator light (4) in the service center in order to determine when the ORS is full.
Reference: For more information, refer to Operation and Maintenance Manual, "Service Center".
Caterpillar Information System:
993K Wheel Loader Hydraulic Tank Breaker Relief Valve (Implement) (Hydraulic Fan) - Clean
993K Wheel Loader Hydraulic System Oil Sample (Implement) (Hydraulic Fan) - Obtain
993K Wheel Loader Hydraulic System Oil Level (Implement) (Hydraulic Fan) - Check
993K Wheel Loader Hydraulic System Oil Filter (Steering Oil Cooler) (Steering Pilot) - Replace
993K Wheel Loader Hydraulic System Oil Filter (Implement Pilot) - Replace - Axle Oil Cooler
993K Wheel Loader Hydraulic System Oil (Implement) (Hydraulic Fan) - Change
Procedures For Updating D6R Series III For Compatibility With the latest Version Of Power Train Software and Electronic Monitoring System III (EMS){7620} Procedures For Updating D6R Series III For Compatibility With the latest Version Of Power Train Software and Electronic Monitoring System III (EMS){7620}
993K Wheel Loader Hydraulic Oil Tank Filter Elements (Case Drain) (Implement) (Hydraulic Fan) - Replace
992K Wheel Loader Bucket Tips - Inspect/Replace
D7G2 Track-Type Tractor Hydraulic System Quick-Drop Valve
D7G2 Track-Type Tractor Hydraulic System Location of Components (Implement System)
D7G2 Track-Type Tractor Hydraulic System Hydraulic Tank
D6G Series II Track-Type Tractor Engine Supplement Engine and Torque Converter - Remove
Filtration Procedure for Wheel Tractor-Scraper Hydraulic Oil {0680, 0768, 5050, 5056} Filtration Procedure for Wheel Tractor-Scraper Hydraulic Oil {0680, 0768, 5050, 5056}
2006/10/23 Improvements to Tilt Cylinder Lines {5057, 5104}
2006/12/18 Updates For Compatibility With the Latest Version Of Power Train Software and Engine Monitoring Software (EMS) {7620}
D6G Series II Track-Type Tractor Engine Supplement Radiator Guard and Radiator - Remove
D6K Track-Type Tractor Hydraulic System Bulldozer Blade
D6K Track-Type Tractor Hydraulic System Cutting Edges and End Bits
D6G Series II Track-Type Tractor Machine Systems Fuel Tank - Remove and Install
657G Wheel Tractor-Scraper Machine Systems Load Cylinder - Remove and Install
Bench Test Procedure for a D4E Track-Type Tractor Transmission{3030, 3073} Bench Test Procedure for a D4E Track-Type Tractor Transmission{3030, 3073}
D6K Track-Type Tractor Hydraulic System Control Valve (Ripper)
816F Series 2 Landfill Compactor, 815F Series 2 Soil Compactor and 814F Series 2 Wheel Dozer General Information