Hydraulic System Oil Filter (Implement Pilot) - Replace - Axle Oil Cooler
Show/hide table
| NOTICE |
|---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Caterpillar products. Dispose of all fluids according to local regulations and mandates. |
Show/hide table
 | |
| Illustration 1 | g01258157 |
- Stop the engine.
- Turn the engine start switch key to ON.
- Move the hydraulic control levers through all of the positions in order to release pressure.
- Turn the engine start switch key to OFF.
- Press the button on the breaker relief valve in order to relieve any hydraulic tank pressure.
- The filter is located inside the access door on the front of the engine compartment. Open the access doors.
- Use a strap type wrench to remove the filter housing.
Show/hide table
 | |
| Illustration 2 | g01259764 |
- Remove the filter element. Dispose of the used filter element properly.
- Clean the filter mounting base.
- Check the condition of the seal. If the seal is damaged, replace the seal with a new seal.
- Insert a new filter element and install the filter housing.
- Close the access doors.
Caterpillar Information System:
993K Wheel Loader Hydraulic System Oil (Implement) (Hydraulic Fan) - Change
Procedures For Updating D6R Series III For Compatibility With the latest Version Of Power Train Software and Electronic Monitoring System III (EMS){7620} Procedures For Updating D6R Series III For Compatibility With the latest Version Of Power Train Software and Electronic Monitoring System III (EMS){7620}
993K Wheel Loader Hydraulic Oil Tank Filter Elements (Case Drain) (Implement) (Hydraulic Fan) - Replace
992K Wheel Loader Bucket Tips - Inspect/Replace
D7G2 Track-Type Tractor Hydraulic System Quick-Drop Valve
D7G2 Track-Type Tractor Hydraulic System Location of Components (Implement System)
D7G2 Track-Type Tractor Hydraulic System Hydraulic Tank
D7G2 Track-Type Tractor Hydraulic System Bulldozer Lift Cylinder
D7G and D7G Series II Track-Type Tractors Machine Systems Decelerator and Brake Control - Remove and Install
AD55B Underground Articulated Truck Machine Electrical System Accessories
Emission Control System for Load Haul Dump Machines and Underground Articulated Trucks Exhaust Purifier
AD55B Underground Articulated Truck Machine Electrical System Idle Timer/Fire Suppression Control
993K Wheel Loader Hydraulic System Oil Filter (Steering Oil Cooler) (Steering Pilot) - Replace
993K Wheel Loader Hydraulic System Oil Level (Implement) (Hydraulic Fan) - Check
993K Wheel Loader Hydraulic System Oil Sample (Implement) (Hydraulic Fan) - Obtain
993K Wheel Loader Hydraulic Tank Breaker Relief Valve (Implement) (Hydraulic Fan) - Clean
993K Wheel Loader Oil Renewal System Oil - Add - If Equipped
D6G Series II Track-Type Tractor Engine Supplement Engine and Torque Converter - Remove
Filtration Procedure for Wheel Tractor-Scraper Hydraulic Oil {0680, 0768, 5050, 5056} Filtration Procedure for Wheel Tractor-Scraper Hydraulic Oil {0680, 0768, 5050, 5056}
2006/10/23 Improvements to Tilt Cylinder Lines {5057, 5104}
2006/12/18 Updates For Compatibility With the Latest Version Of Power Train Software and Engine Monitoring Software (EMS) {7620}
D6G Series II Track-Type Tractor Engine Supplement Radiator Guard and Radiator - Remove
D6K Track-Type Tractor Hydraulic System Bulldozer Blade
D6K Track-Type Tractor Hydraulic System Cutting Edges and End Bits