Turbocharger
Show/hide table
图 1 | g02648717 |
Show/hide table
技术规格 - 268-0009 涡轮增压器总成和 333-2235 涡轮增压器总成 | |||
项目 | 数量 | 零件 | 技术规格说明 |
1 | 8 | 2N-2765 高温螺栓 | 组装前,使用 Loctite C5A 铜防咬合剂润滑螺纹和轴承表面。
拧紧至扭矩为 |
Show/hide table
图 2 | g02648719 |
后视图 |
Show/hide table
技术规格 - 268-0009 涡轮增压器总成和 333-2235 涡轮增压器总成 | |||
项目 | 数量 | 零件 | 技术规格说明 |
2 | 8 | - | 采用以下步骤拧紧螺栓:
1. 装配前,用 Loctite C5A 润滑螺栓螺纹。 2. 按任意顺序拧紧螺栓 3 至扭矩 3. 按任意顺序拧紧螺栓 4 至扭矩 |
Show/hide table
图 3 | g02648721 |
Show/hide table
技术规格 - 268-0009 涡轮增压器总成和 333-2235 涡轮增压器总成 | |||
项目 | 数量 | 零件 | 技术规格说明 |
5 | 2 | 4W-9977 卡箍组件 | 采用下述步骤拧紧卡箍组件:
1. 拧紧卡箍组件至扭矩 2. 用软面锤轻轻敲打卡箍组件周围。 3. 再将四个卡箍组件拧紧至扭矩 |
6 | 2 | 9N-2038 涡轮卡箍组件 |
Caterpillar Information System:
Removal and Installation of the 126-1774 Endbell Cover {7553} Removal and Installation of the 126-1774 Endbell Cover {7553}
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Control Valve (Counterweight Circuit) - Install
TH31 Well Servicing Transmissions Modulating Valve (Torque Converter Lockup Clutch) - Remove and Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Swing Gear and Bearing - Install
C11 and C13 Engines Water Pump
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Swing Gear and Bearing - Remove
TH31 Well Servicing Transmissions Modulating Valve (Transmission Clutch) - Remove and Install
TH48-E80 Petroleum Transmission General Information
C175 Generator Set Engines Electronic Control Module (Engine) - Remove and Install
C175 Generator Set Engines Water Temperature Control Valve - Install
C7 Engines for Caterpillar Built Machines Flywheel
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Oil Filter (Transmission)
C27 and C32 Generator Set Engines Can Not Reach Top Engine RPM
C27 and C32 Generator Set Engines Engine Will Not Crank
C27 and C32 Generator Set Engines Intermittent Low Power or Power Cutout
C27 and C32 Generator Set Engines Low Power/Poor or No Response to Throttle
C27 and C32 Generator Set Engines Event Codes
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks CID 0001 FMI 11 Cylinder #1 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks CID 0002 FMI 11 Cylinder #2 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks CID 0003 FMI 11 Cylinder #3 Injector fault
TH31 Well Servicing Transmissions Speed Sensor (Transmission) - Remove and Install
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks CID 0004 FMI 11 Cylinder #4 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks CID 0005 FMI 11 Cylinder #5 Injector fault
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks CID 0006 FMI 11 Cylinder #6 Injector fault