5 x 7 Filter
251-2114 Oil Filter Gp
Illustration 1 | g01626600 |
(1) Apply 9S-3263 Thread Lock Compound to the end of the threads of the 167-6914 Taperlock Stud .
(2) Tighten 167-6914 Taperlock Stud to the following torque. ... 54 ± 7 N·m (40 ± 5 lb ft)
(3) Tighten 4L-4986 Locknut to the following torque. ... 30 ± 5.4 N·m (22 ± 4 lb ft)
(4) Install 8T-7934 Washer and tighten 183-7121 Bolt to the following torque. ... 55 ± 10 N·m (41 ± 7 lb ft)
5 x 11 Filter
251-5840 Oil Filter Gp
Illustration 2 | g01626599 |
(1) Apply 9S-3263 Thread Lock Compound to the end of the threads of the 234-9566 Taperlock Stud .
(2) Tighten 234-9566 Taperlock Stud to the following torque. ... 54 ± 7 N·m (40 ± 5 lb ft)
(3) Tighten 4L-4986 Locknut to the following torque. ... 30 ± 5.4 N·m (22 ± 4 lb ft)
(4) Install 6V-5839 Washer and tighten 8T-5436 Bolt to the following torque. ... 55 ± 10 N·m (41 ± 7 lb ft)
Flow rate ... 261 L/min (69 US gpm)
Spin-On Filter
134-3014 Oil Filter
Illustration 3 | g01297356 |
(1) Pressure switch (2) Transmission filter |
Note: Do not use an impact wrench to install the filter. Tighten the oil filter until the oil filter gasket contacts the base. Torque the oil filter to hand tight plus one-half turn.
Bypass pressure setting ... 345 kPa (50 psi)
Nominal flow rate ... 165 L/min (43.6 US gpm)
Nominal working pressure ... 2412 kPa (350 psi)
Circuit ... Normally closed
Voltage ... 6 to 30 VDC