Flywheel
Show/hide table
图 1 | g01444128 |
典型实例 |
注: 参阅系统运作/测试和调整以了解检查飞轮的正确方法。
采用以下步骤安装齿轮:
- 安装齿轮 (2) 。
- 使齿轮上的零件号面向发动机缸体。
- 使齿轮紧靠台肩。
- 上紧用来将飞轮固定到曲轴上的八条锁紧螺栓 (1) 至扭矩为 120 ± 20 N·m (90 ± 15 lb ft)。
Caterpillar Information System:
TH31-C9I, TH31-C9P, TH31-C9T, TH35-C13I, TH35-C13T, TH35-C15I and TH35-C15T Petroleum Power Train Packages and TH31-E61 and TH35-E81 Petroleum Transmissions Transmission Oil Filter (Transmission)
C15 and C18 Engines for Caterpillar Built Machines Piston Cooling Jet
C7 Petroleum Engines Water Lines
CX31 On-Highway Transmission Modulating Valve
C7 Petroleum Engines Engine Oil Lines
TH31 Well Servicing Transmissions Bypass Valve - Remove and Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Negative Flow Control, Proportional Reducing Valve) - Assemble
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Negative Flow Control, Proportional Reducing Valve) - Disassemble
C7 Petroleum Engines Exhaust Elbow
C7 Petroleum Engines Exhaust Elbow
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Negative Flow Control, Proportional Reducing Valve) - Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Solenoid Valve (Negative Flow Control, Proportional Reducing Valve) - Remove
C175 Generator Set Engines Water Temperature Control Valve - Install
C175 Generator Set Engines Electronic Control Module (Engine) - Remove and Install
TH48-E80 Petroleum Transmission General Information
TH31 Well Servicing Transmissions Modulating Valve (Transmission Clutch) - Remove and Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Swing Gear and Bearing - Remove
C11 and C13 Engines Water Pump
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Swing Gear and Bearing - Install
TH31 Well Servicing Transmissions Modulating Valve (Torque Converter Lockup Clutch) - Remove and Install
345C Excavator and 345C MHPU Mobile Hydraulic Power Unit Machine Systems Control Valve (Counterweight Circuit) - Install
Removal and Installation of the 126-1774 Endbell Cover {7553} Removal and Installation of the 126-1774 Endbell Cover {7553}
3500 Engines Turbocharger
C27 and C32 Generator Set Engines Can Not Reach Top Engine RPM